Operation Manual

V
V
P
P
N
N
D
D
U
U
A
A
L
L
-
-
W
W
A
A
N
N
R
R
o
o
u
u
t
t
e
e
r
r
59
Duplex Status：
This feature allows users to select the network hardware connection speed
working mode for the Ethernet. The options are full duplex and half duplex.
Auto Neg.：
The Auto-Negotiation mode can enable each port to automatically adjust
and gather the connection speed and duplex mode. Therefore, if Enabled
Auto-Neg. selected, the ports setup will be done without any manual setting
by administrators.
VLAN：
This feature allows administrators to set the LAN port to be one or more
disconnected network sessions. All of them will be able to log on to the
Internet through the device.
Members in the same network session (within the same VLAN) can see
and communicate with each other. Members in different VLAN will not
know the existence of other members.
VLAN All：
Set VLAN All port to be the public area of VLAN so that it can be connected
to other VLAN networks. A server should be constructed for the intranet so
that all VLAN group can visit this server. Set one of the network ports as
VLAN All. Connect the server to VLAN All so that computers of different
VLAN groups can be connected to this server. Moreover, the port where the
administrator locates must be set as VLAN All so that it can be connected to
the entire network to facilitate network management.