User Manual

18
Note:
To avoid electric shock to you or damage to the meter, do
not apply a voltage higher than 600V between the
terminals.
Measuring DC or AC Current
1. Set the rotary switch in the position.
2. If you want to measure DC current, press the "FUNC "
key until " " appears on the display.
If you want to measure AC current, press the "FUNC "
key until " " appears on the display.
3. Turn off power to the circuit to be tested, and then
discharge all capacitors.
4. Break the circuit path to be tested, and connect the test
leads in series with the circuit.
5. Turn on power to the circuit, then read the display. For
DC current measurements, the polarity of the red test
lead connection will be indicated as well.