User Manual

21
3. If the display shows a value other than zero, this value
must be subtracted from the subsequent
measurements to get more accurate readings.
4. Connect the test leads across the capacitor to be
tested.
5. Wait until the reading is stable, then read the reading
on the display.
Note:
1. Before measurement, make sure that the capacitor to
be tested has been discharged thoroughly.
2. For high capacitance measurements, it may take about
30 secs for the meter to complete measurement and
stabilize reading. This is normal.
Measuring Frequency
1. Set the rotary switch in the Hz position.
2. Connect the test leads across the source or circuit to
be tested.
3. Read the reading on the display.