User Manual

This meter has been designed according to IEC 61010
concerning electronic measuring instruments with a meas-
urement category ( CAT II 600V ) and pollution degree 2.
SAFETY INFORMATION
To avoid possible electric shock or personal injury,
follow these guidelines:
Warning
Do not use the meter if it is damaged. Before you use
the meter, inspect the case. Pay particular attention to
the insulation surrounding the connectors.
Inspect the test leads for damaged insulation or
exposed metal. Check the test leads for continuity.
Replace damaged test leads before you use the meter.
Do not use the meter if it operates abnormally.
Protection may be impaired. When in doubt, have the
meter serviced.
Do not operate the meter where explosive gas, vapor
or dust is present.
Do not apply more than the rated voltage, as marked
on the meter, between the test leads or between any
test lead and earth ground.
Before use, verify the meter's operation by measuring
a known voltage.
When servicing the meter, use only specified
replacement parts.
2