User Manual

4. " HOLD " key

Used to enter or exit Data Hold mode.

5. "FUNC " key

Used to switch between:

DC current and AC current measurement functions.

DC voltage and AC voltage measurement functions.

Resistance, diode, continuity and capacitance test

functions.

6. LED Indicator

This LED indicator lights when the built-in buzzer

sounds.

7. Rotary Switch

Used to select desired function as well as to turn on or

off the meter.

To save battery charge, set this switch in the " OFF "

position when the meter is not in use.

How to Fold and Unfold the Meter

See Figure 2, there is a slider lock at a side of the meter.

Before folding the meter, you must slide the slider lock in

direction of the arrow on it, to the end. Then fold the meter

and then slide the slider lock gently in the opposite