User manual

APS User Manual
100
1.2.4-7 Port Status
This section is used to display the status information for each of the configured STP CIST Ports.
Web Interface
To view the STP CIST Port Status via the Web Interface:
1. Click Configuration, Spanning Tree and Port Status.
2. If you want to auto-refresh the information you will need to check the Auto-Refresh tick box.
3. Click Refresh to manually refresh the information.
Parameter Description
Port: Physical port of the switch.
CIST Role: The current STP port role of the CIST port. The port role can be one of the
following values: Non-STP, AlternatePort, Backup Port, RootPort,
DesignatedPort Disabled.
CIST State: The current STP port state of the CIST port. The port state can be one of the
following values: Blocking, Learning and Forwarding.
Uptime: The time since the bridge port was last initialized.
Fig. 45 Port Status Information