User manual

APS User Manual
187
1.2.11-7-2 Group to VLAN
This section is used to map the groups configured in section 1.2.10-7-1 to a VLAN Group.
Web Interface
To map the protocol group to a VLAN group via the Web Interface:
1. Click Configuration, VLAN, Protocol-based VLAN’s and Group to VLAN.
2. Specify the Group Name and enter a valid VLAN ID.
3. Select the required ports for the group, by ticking the check box corresponding to the port
number.
4. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Parameter Description
Delete: To delete a Group Name to VLAN entry, check this box and press Apply. The
entry will be deleted on the selected switch.
Group Name: A valid Group Name is a string of up to 16 characters, which consists of a
combination of alphabets (a-z or A-Z) and integers (0-9), no special
characters are allowed. When entering a Group Name the Group Name
must first exist in the Protocol to Group section.
Fig. 84 Group to VLAN Mapping