User manual

APS User Manual
222
1.2.15-10 QoS Control List
Use the QoS Control List Configuration page to configure Quality of Service policies for handling
ingress packets based on Ethernet type, VLAN ID, TCP/UDP port, DSCP, ToS, or VLAN priority tag.
Once a QCE is mapped to a port, traffic matching the first entry in the QoS Control List is assigned to
the QoS class, drop precedence level, and DSCP value defined by that entry. Traffic not matching any
of the QCEs are classified to the default QoS Class for the port.
Web Interface
To configure the QoS Control List settings via the Web Interface:
1. Click Configuration, QoS and QoS Control List.
2. Click the button to add a new QCE, or use the other QCE modification buttons to specify
the editing action (i.e., edit, delete, or moving the relative position of entry in the list).
3. When editing an entry on the QCE Configuration page, specify the relevant criteria to be
matched, and the response to a match.
4. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Fig. 107 QoS Control List