User manual

APS User Manual

1.2.1-6 SFP Information

This section displays the detailed information regarding the SFP module(s) installed in the switch.

Web Interface

To view the detailed SFP Information via the Web Interface:

1. Click Configuration, Port and SFP Information.

2. Select the port you want to view.

3. If you would like the page to auto-refresh the SFP Information, check the Auto-Refresh tick

box at the top of the page, or alternatively hit the refresh button to refresh the page

manually.

Parameter Description

Connector Type: Displays the connector type of the SFP module, normally this would be UTP,

LC or SC.

Fibre Type: Displays the fibre type, multimode or single mode.

Tx Central Wavelength: Displays the optical fibre wavelength, normally 850nm, 1310nm or 1550nm.

Baud Rate: Displays the speed of the SFP module, 100Mbps, 1000Mbps, 10Gb.

Vendor OUI: OUI number of the vendors SFP Module.

Fig. 25 SFP information