User`s manual

2.4.3 802.1Q Control Per Port Config

The above screen allows you to control individual port 802.1Q settings:

Ø Port No – Select the port to be configured. Only the red-colored leading port will been shown

in the dropdown if a trunk group has been created.

Ø Tag Config – There are two parameters in this field: Priority (0-7) and VID (1-4094).

Set the 2 parameters to determine the 802.1Q tag contents.

Ø Non 1Q Frame – This determines what will occur to packets that do not match the 802.1Q VID

assigned to this port. Options are: Drop :- to drop the non matching packet, and Not Drop :- to

forward the packet.

Below the configuration screen, there are three buttons to select from:

View Settings : Select the Port No from the above table and click this button to see the specified port

tag settings.

Apply: To submit the port configuration settings to the switch.

Back: To go back to the 802.1Q main settings page.