User`s manual

2.6.6 Configure Mirror Filter

Ø Step 1: Choose Ingress Filter to be a Source Address, and choose Egress Filter to be a

Destination Address.

Ø Step 2: Enter Ingress MAC Address (00-01-02-03-04-05), and Egress MAC Address

(0A-0B-0C-0D-0E-0F).

Ø Step 3: Enter Ingress Divider as 5, and enter Egress Divider as 8.

Ø Step 4: Click the Apply button to activate the mirroring filter settings.

Result: Every fifth frame with source address (00-01-02-03-04-05) in ingress direction on monitored

port(s) and every eight frame with destination address (0A-0B-0C-0D-0E-0F) in egress direction on

monitored port(s) will be mirrored.