POEFE24TV2 User Manual Fast Ethernet PoE+ Unmanaged Switch POEFE24TV2 User Manual Version 1.0.0.
POEFE24TV2 User Manual Contents Compliances and Safety Statements ................................ 3 1. Introduction ................................................................... 6 2. Checklist ......................................................................... 6 3. Installation ..................................................................... 7 3.1 Installation Method ............................................................. 7 3.2 Desktop or Shelf Installation .........................
POEFE24TV2 User Manual Compliances and Safety Statements Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
POEFE24TV2 User Manual according to IEC 61000-4-11:2004 LVD: - EN60950-1:2006+A11:2009+A1:2010EMC: Australian C-Tick Compliance. This equipment is compliant with the required Australian C-Tick standards PLEASE READ THE FOLLOWING SAFETY INFORMATION CAREFULLY BEFORE INSTALLING THE SWITCH: WARNING: Installation and removal of the unit must be carried out by qualified personnel only.
POEFE24TV2 User Manual SAFETY PRECAUTIONS Read the following information carefully before operating the device. Please follow the following precaution items to protect the device from risks and damage caused by fire and electric power: Use the power adapter that is included with the device package. Pay attention to the power load of the outlet or prolonged lines. An overburdened power outlet or damaged cords and plugs may cause electric shock or fire.
POEFE24TV2 User Manual 1. Introduction The POEFE24TV2 is an unmanaged low cost Fast Ethernet Power over Ethernet switch. The switch consists of 24x 10/100Mbps PoE ports. All ports are auto sensing, auto MDI/X ports allowing easy connectivity to your existing switching infrastructure and your PD PoE devices, such as IP Phones, Wireless Access Points and IP Video Cameras. All ports support up to 30W of power, with the switch supporting 9W per port at full load. The POEFE24TV2 supports up to 220W in total.
POEFE24TV2 User Manual 3. Installation 3.1 Installation Method The site where you install the switch may greatly affect its performance. When installing, please take the following into consideration. - Install the switch in a cool, dry place. See technical specifications for the acceptable temperature and humidity operating ranges. Install the switch on a secure, level surface that can support its weight, at least 5Kg.
POEFE24TV2 User Manual Fig. 3 Mounting the Switch 4. Powering on the Switch Connect the female connector of the power cord here, and the male connector to the AC power outlet. Make sure the voltage of the power supply meets the requirement of the input voltage. Fig.
POEFE24TV2 User Manual 5. LED Description LED Power LINK POE Colour On Off On Blink Off On Off Function Appropriate power is supplied Power is not available A valid link is established Traffic is present on port No link established PD PoE device has successfully connected to the port. No POE device connected Fig.
POEFE24TV2 User Manual 6. Network Connection This switch is designed to be connected to 10 or 100Mbps network cards in PCs and Servers, as well as to other switches and hubs. Cabling Guidelines The RJ-45 ports on the switch support automatic MDI/MDI-X pinout configuration, so you can use standard straight-through twisted-pair cables to connect to any other network device (PCs, servers, switches, routers, or hubs).
POEFE24TV2 User Manual 7. Technical Specifications Model Standards Number of Ports Network Media Transfer Method Switching Capacity MAC Address Table Frame Filtering and Forward Rate POE POE Pins LED indicators Dimensions (W × D × H) Environment Certification POEFE24TV2 IEEE802.3 10Base-T, IEEE802.
POEFE24TV2 User Manual Appendix A. Troubleshooting Diagnosing Switch Indicators The Power Led Is Off Make sure the AC power cord is connected to the switch and power source properly. Make sure the power source is ON. The Link/Act Led Is Off When A Device Is Connected To The Corresponding Port Make sure that the cable connectors are firmly plugged into the switch and the device. Make sure the connected device is turned on and working properly.
POEFE24TV2 User Manual Appendix A. RJ-45 Connections Fig. 4 RJ-45 Connectors, switch and cable views Pin no. 1 2 3 4 5 6 7 8 RJ-45 Connector pin out MDI-I signal TX+ TXRX+ not used not used RXnot used not used MDI-X signal RX+ RXTX+ not used not used TXnot used not used Below is a diagram of a typical straight through and cross-over cable connection: Fig. 5 Straight Through Cable connection Fig.
