Switch User Manual

POEFEM24T2SFP User Manual

3-7-2. Tag-based Group

Fig. 3-24

Function name:

Tag-based Group Configuration

Function description:

Shows information of the existing tag-based VLAN groups, the administrator can also

Add, Delete and Edit VLAN’s using the function buttons provided.

Parameters description:

VLAN Name:

Is the name of the VLAN group defined by the Administrator. Valid characters

that can be used are A – Z, a – z and 0 – 9. Special characters are not allowed

and a total of 15 characters are supported.

VID:

VID is the VLAN Identifier. Each tag-based VLAN group must have a unique VID.

Member:

This is used to add or remove a particular port from the VLAN group, tick the

check box next to the port number you would like to be a member of the group.

Untag:

Select whether the port belonging to the VLAN group will be a tagged or

untagged port.

Add:

Used to create a new tag-based VLAN group, enter the name and the VID and

select whether you would like to enable SYM-VLAN. You will now have to select

what ports you would like to belong to this group. Click the Apply button for the

settings to take effect.