Installation Instructions

TX-SL019

Wireless remote control for Dashboard

Instruction

OVERVIEW:



REMOTE PROGRAMMING PROCESS

：

1. Switch off DC Power or disconnect from battery.

2. Make sure there is NO other transmitter operating at the same time.

3. Switch on DC Power, within 5 seconds press Remote up ▲ and down

▼button once simultaneously.

Searchlight will flash to acknowledge the Remote, connection has

been made.



5. To program the second Remote (up to 4 remotes may be used with the

searchlight, programming a fifth will replace the first), within five

seconds after the first Remote programmed, press the second Remote

up and down button or repeat step 1.



RADIO FREQUENCY

：

2.4GHz

Wireless Remote Battery: AAA*2pcs

Wireless Remote Operation Distance: 65M

INSTALLATION:

1. OPEN UP

2. SCREW the

TX-SL019 on the Dashboard

Length Unit: mm

PAGE 1
TX-SL019 Wireless remote control for Dashboard Instruction OVERVIEW: INSTALLATION: 1. OPEN UP 2. SCREW the TX-SL019 on the Dashboard REMOTE PROGRAMMING PROCESS： 1. Switch off DC Power or disconnect from battery. 2. Make sure there is NO other transmitter operating at the same time. 3. Switch on DC Power, within 5 seconds press Remote up ▲ and down ▼button once simultaneously. 4. Searchlight will flash to acknowledge the Remote, connection has been made. 5.
PAGE 2
FCC INFORMATION The Federal Communication Commission Radio Frequency Intererence Statement includes the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.