User's Manual

11
2.2 Mounting Device Main Unit
The following guidelines should be noticed when selecting the environment to install
your AMEC WideLink B600:
 Do not install the device in a flammable or hazardous atmosphere such as in an
engine or generator room or close to fuel tanks.
 Installation of the device should be undertaken in a safe environment without
being exposed to any splashing water or rain.
 There should be adequate space around the device for routing of cables. See figure
below for details of the device dimensions.
 The safe distance of the device to any magnetic compass is at least 0.3m.
 The operating temperature is between -15°C and +55°C.
 The device can be installed and mounted on flat surface, or it can be mounted on
wall with the four self tapping screws supplied.
 The device should be mounted in a location where the indicators can readily be
observed as these indicators deliver relevant information on the status of the
device.
Figure 2 Mounting the Device