User's Manual
Table Of Contents
21
3.2 Programming your vessel data
After the device is successfully connected with the Configuration Software, click on
the “STATIC DATA” tab. You will require the following information in order to configure
the device:
• Vessel´s name: limited to 20 characters
• Call sign: limited to 7 characters
• MMSI: Enter your MMSI (Maritime Mobile Service Identity) number
• Ship type: choose your ship type from the drop down list
• Ship dimensions: Enter the vessel dimensions by appointing position of your GPS
antenna
WARNING: The MMSI number can only be entered
once. Be sure to enter the correct MMSI number, as it
cannot be corrected if entered incorrectly.
Figure 12 Static Data Setting