User's Manual

4
WARNING!
WARNING: The device must be installed and configured in conformity with the
provided instructions in the manual by qualified installer in order to ensure the
device performance.
WARNING: It is the responsibility of the operator to handle the AIS device with
care. The device cannot replace human vigilance. Therefore it is important to
keep a diligent outlook at all times.
WARNING: Please bear in mind that not all vessels are equipped with AIS
transponders and therefore may not be visible to this device. Likewise, certain
conditions, such as device malfunction, the environment, improper use, and
overcrowded port traffic, may exist whereby the vessel equipped with this AIS
device is not visible to other AIS transponders.
WARNING: DO NOT DISASSEMBLE OR MODIFY THE EQUIPMENT. Improper
disassembly or modification could impair its performance and will invalidate the
guarantee.
FOR USERS IN THE UNITED STATES OF AMERICA ONLY
WARNING: It is a violation of the rules of the Federal Communications
Commission to input an MMSI that has not been properly assigned to the
end user, or to otherwise input any inaccurate data in this device.
★ The entry of static data into this device shall be performed by the vendor of
the device or by an appropriately qualified person in the business of installing
marine communications equipment on board vessels.
★ Instructions on how to accurately enter and confirm static data in the device
can be found in this user manual.
FOREWORD
We thank you for the purchase of your new WideLink B600, AIS SOTDMA class B
transponder. Wherever you sail now, you can have a better overview of your
surroundings at sea and voyage with more safety.
WideLink B600 is strictly tested to meet the rigorous demands of the marine
environment. With proper installation and use, the equipment will serve loyally and
reliably at its optimum.
For sales, services, and technical supports, please contact your local AMEC
representatives or Alltek Marine Electronics Corp at [e-mail] or
[e-mail]. You are always welcome to visit our website at
www.alltekmarine.com for new product status and company update.
Thank you again. Be safe.