User's Manual

9
3.2 AIS Configuration Software Installation
The AMEC Class B Configuration software enables users to set up the transponder by
entering own ship’s information. It provides also the facilities to monitor and
diagnose your transponder.
The AMEC AIS Configuration program can be found in the CD supplied. Follow the
installation instructions below.
Open the AMEC AIS Configuration file and click on the setup icon to start the
installation process. Follow the on screen instructions to finish installation and check
the checkbox to start the AMEC AIS Configuration after the installation.
Once the Configuration Software is launched, you can establish the connection with
PC either automatically or manually by assigning the COM port and baud rate.
As soon as the transponder has a successful connection, click on “STATIC DATA” tab.
You will require the following information in order to configure your AIS transponder:
 Vessel name: limited to 20 characters
 Call sign: limited to 7 characters
 MMSI: Enter your MMSI (Maritime Mobile Service Identity) number
 Vessel type: choose your ship type from the drop down list
 Vessel dimensions and position of your GPS antenna installation
WARNING: MMSI can only be entered once, be sure to enter the correct MMSI.