User's Manual

21
4.8 Connecting to Power Supply
The CAMINO-108 requires a 12V or 24V DC power supply (9.6 – 31.2V) capable of
supplying 2A peak current. The red wire and the black wire on the 12 pin cable are
used to connect the power supply’s positive and negative terminals. Practically, it is
suggested to use the fuse panel before connecting directly to the battery/power
supply.
4.9 Connection to NMEA2000 Network
NMEA 2000 is the latest marine standard for data communication between marine
instruments. With a NMEA 2000 network onboard, a faster data throughput, better
transmission reliability and easy data sharing can be realized.
The CAMINO-108 is equipped with NMEA2000 interface with LEN=1. AIS targets
received by the transponder now can be easily displayed on your chart plotter when
both are connected to a NMEA2000 network with a compatible T-connector and drop
cable available by your local service partner.