User's Manual

24
5.3 SD Card Data Logging
The CAMINO-108 records voyage data onto a SD card in .txt format. The compatible
SD card types are listed as followed:
 Standard “SD” with maximum 2GB size
 Standard “SDHC” with maximum 32GB size
 Supported data format: FAT12/16 by SD, FAT32 by SDHC
Please insert the SD card into the slot as shown below before powering on the
transponder. After the transponder is switched on, it will commence logging voyage
data and indicates the writing process by flashing the green SD LED indicator.
The log files have naming convention of AIS_XXXXXX.txt with increment from 000001
to 999999. Entry in the log file is vessel’s GPS sentence in IEC61162 format.
When memory is full, SD LED light indicator will turn steady green to remind user to
replace the SD card. No further data logging will take place before new saving
capacity is available or replaced with an empty SD card.
Removing SD card from the transponder stops data logging immediately, and the SD
LED will turn off. Make sure the device’s power is off before inserting SD card.
Figure 9 Inserting SD memory card