User's Manual

9
2.1.2 Items in the Package
Table 2-1-2 Items in the Package
No.
Description
Qty
1
MANDO-301/303 AIS AtoN main unit
1
2
Installation Kit
Power cable 1.5M, AWG 16
1
8 pin connector with waterproof cup, cable 1M, AWG 24
1
12 pin connector with waterproof cup, cable 1M, AWG 26
1
M4×6 Screw
8
1/4×3/4 Screw
4
3
CD-ROM: AMEC AtoN Configuration and Operation Manual
1
2.2 Installation Procedure
Please complete the AtoN installation by the following steps:
 Unpacking
Unpack the standard package and verify all components.
 Initial Inspection
Inspect all hardware for damage. If there is any damage, please consult directly with AMEC or
authorized local distributor/dealer. Retain original packing material for possible future use in
shipping the AIS Monitoring System.
 Installing the AtoN device
Please survey a suitable place for device installation.
Firmly screw the four M4×6 screws from the standard package to the hole.