SDS

ManualsBrandsAllura ManualsBuilding materials5/16" x 5-1/4" x 12' Smooth Fiber Cement Lap Siding

Safety Data Sheet

Allura™ Lap & Vertical Siding, Soffit, Shakes and Trim & Fascia Board, Fiber Cement Underlayment & BackerBoard

Page 1

Preparation Date: 15 Sep 2017

Format: GHS Language: English (US)

WHMIS, OSHA HCS 2012

Product Identifier

Product Name: • Allura Fiber Cement Siding

Synonyms • Fiber Cement; Fiber Cement Siding

Product Code • Trim - CT-10103-4; Allura - CT-10074-7

Relevant identified uses of the substance or mixture and uses advised against

Recommended use • Fiber Cement products are intended for exterior cladding. Allura Fiber Cement Siding

is available in traditional and contemporary aesthetics. It is suitable for residential and

light commercial applications. These products offer a high degree of dimensional

stability and impact resistance.

Allura Underlayment & BackerBoard are for interior floors, walls and countertops.

Details of the supplier of the safety data sheet

Manufacturer • Allura

Corporate Headquarters

15055 Woodham Drive

Houston, Texas 77073

United States

www.AlluraUSA.com

Telephone • 1 844 4 Allura (1 844 425 5872)

Emergency Telephone Number

Manufacturer • (800) 424-9300 - Chemtrec

United States (US)

According to OSHA 29 CFR 1910.1200 HCS

Classification of the substance or mixture

OSHA HCS 2012 • Carcinogenicity 1A - H350

Specific Target Organ Toxicity Repeated Exposure 1 - H372

Label elements

OSHA HCS 2012 DANGER

Hazard statements • May cause cancer. - H350

Causes damage to organs through prolonged or repeated exposure. - H372

Precautionary statements

Prevention: • Obtain special instructions before use. - P201

•

Do not handle until all safety precautions have been read and understood. - P202

•

Do not breathe dust. - P260

•

Wash thoroughly after handling. - P264

•

Do not eat, drink or smoke when using this product. - P270

Safety Data Sheet

Section 1: Identification

Section 2: Hazard Identification

Allura™ Lap & Vertical Siding, Soffit, Shakes and Trim & Fascia Board, Fiber Cement Underlayment & BackerBoard

Page 1

Preparation Date: 15 Sep 2017

Format: GHS Language: English (US)

WHMIS, OSHA HCS 2012

Product Identifier

Product Name: •

Allura Fiber Cement Siding

Synonyms • Fiber Cement; Fiber Cement Siding

Product Code • Trim - CT-10103-4; Allura - CT-10074-7

Relevant identified uses of the substance or mixture and uses advised against

Recommended use • Fiber Cement products are intended for exterior cladding. Allura Fiber Cement Siding

is available in traditional and contemporary aesthetics. It is suitable for residential and

light commercial applications. These products offer a high degree of dimensional

stability and impact resistance.

Allura Underlayment & BackerBoard are for interior floors, walls and countertops.

Details of the supplier of the safety data sheet

Manufacturer • Allura

Corporate Headquarters

15055 Woodham Drive

Houston, Texas 77073

United States

www.AlluraUSA.com

Telephone • 1 844 4 Allura (1 844 425 5872)

Emergency Telephone Number

Manufacturer • (800) 424-9300 - Chemtrec

United States (US)

According to OSHA 29 CFR 1910.1200 HCS

Classification of the substance or mixture

OSHA HCS 2012 • Carcinogenicity 1A - H350

Specific Target Organ Toxicity Repeated Exposure 1 - H372

Label elements

OSHA HCS 2012 DANGER

Hazard statements • May cause cancer. - H350

Causes damage to organs through prolonged or repeated exposure. - H372

Precautionary statements

Prevention: • Obtain special instructions before use. - P201

•

Do not handle until all safety precautions have been read and understood. - P202

•

Do not breathe dust. - P260

•

Wash thoroughly after handling. - P264

•

Do not eat, drink or smoke when using this product. - P270

Safety Data Sheet

Section 1: Identification

Section 2: Hazard Identification

Allura™ Lap & Vertical Siding, Soffit, Shakes and Trim & Fascia Board, Fiber Cement Underlayment & BackerBoard

Page 1

Preparation Date: 15 Sep 2017

Format: GHS Language: English (US)

WHMIS, OSHA HCS 2012

Product Identifier

Product Name: • Allura Fiber Cement Siding

Synonyms • Fiber Cement; Fiber Cement Siding

Product Code • Trim - CT-10103-4; Allura - CT-10074-7

Relevant identified uses of the substance or mixture and uses advised against

Recommended use • Fiber Cement products are intended for exterior cladding. Allura Fiber Cement Siding

is available in traditional and contemporary aesthetics. It is suitable for residential and

light commercial applications. These products offer a high degree of dimensional

stability and impact resistance.

Allura Underlayment & BackerBoard are for interior floors, walls and countertops.

Details of the supplier of the safety data sheet

Manufacturer • Allura

Corporate Headquarters

15055 Woodham Drive

Houston, Texas 77073

United States

www.AlluraUSA.com

Telephone • 1 844 4 Allura (1 844 425 5872)

Emergency Telephone Number

Manufacturer • (800) 424-9300 - Chemtrec

United States (US)

According to OSHA 29 CFR 1910.1200 HCS

Classification of the substance or mixture

OSHA HCS 2012 • Carcinogenicity 1A - H350

Specific Target Organ Toxicity Repeated Exposure 1 - H372

Label elements

OSHA HCS 2012 DANGER

Hazard statements • May cause cancer. - H350

Causes damage to organs through prolonged or repeated exposure. - H372

Precautionary statements

Prevention: • Obtain special instructions before use. - P201

•

Do not handle until all safety precautions have been read and understood. - P202

•

Do not breathe dust. - P260

•

Wash thoroughly after handling. - P264

•

Do not eat, drink or smoke when using this product. - P270

Safety Data Sheet

Section 1: Identification

Section 2: Hazard Identification

Summary of content (12 pages)

PAGE 1
Safety Safety Data Data Sheet Sheet Safety Data Sheet Safety Data Sheet Section Section 1: 1: Identification Identification Section 1: Identification Product Product Identifier Identifier Product Identifier Product Name: • Allura Fiber Cement Siding Product Name: • Allura Fiber Cement Siding Product Name: • Allura Fiber Cement Siding Synonyms Synonyms Product Code Synonyms Product Code Product Code • Fiber Cement; Fiber Cement Siding • Fiber Cement; Fiber Cement Siding • Trim CT-10103-4; - CT-10074-7 F
PAGE 2
• Wear protective gloves/protective clothing/eye protection/face protection. - P280 • User personal protective equipment as required. -P281 Response • If exposed or concerned: Get medical advice/attention. - P308+P313 • Get medical advice/attention if you feel unwell. - P314 Storage/Disposal • Dispose of content and/or container in accordance with local, regional, national, and/or international regulations. - P501 Other Hazards OSHA HCS 2012 • Under United States Regulations (29 CFR 1910.
PAGE 3
Section 4: First-Aid Measures Description of first aid measures Inhalation Eye Ingestion • Remove to fresh air, apply artificial respiration and/or oxygen if necessary and get medical attention. • Remove contaminated clothing and wash exposed skin with soap and water. If irritation develops or persists, seek medical attention. • Remove to fresh air, apply artificial respiration and/or oxygen if necessary and get medical attention.
PAGE 4
Section 7: Handling and Storage Precautions for safe handling Handling • Avoid breathing dust generated when sawing, routing, drilling, and sanding this product. • Wear personal protective equipment. Wash thoroughly after handling. Conditions for safe storage, including any incompatibilities • Store in a dry place and under cover to protect product.
PAGE 5
EXPOSURE LIMITS/GUIDELINES CONT’D Silica, amorphous (7631-86-9) TWAs Not established Not established Not established Not established 2 mg/m3 TWA (respirable mass); 5 mg/m3 TWA (total mass); 0.05 mg/m3 TWA (regulated under Silica flour, respirable mass); 0.15 mg/m3 TWA (total mass, regulated under Silica flour) Quartz (14808-60-7) TWAs 0.025 mg/m3 TWA (respirable fraction) 0.025 mg/m3 TWA (respirable) 0.025 mg/m3 TWA (respirable fraction) 0.1 mg/m3 TWA (respirable fraction) 0.
PAGE 6
EXPOSURE LIMITS/GUIDELINES CONT’D Silica, amorphous (7631-86-9) TWAs Not established 2 mg/m3 TWA Not established (respirable mass); 5 mg/m3 TWA (total mass); 0.05 mg/m3 TWA (regulated under Silica flour, respirable mass); 0.
PAGE 7
General Industrial Hygiene Considerations • Keep formation of airborne dusts to a minimum. Use good industrial hygiene practices in handling this material. • Use a shop vacuum with filter efficiency of at least 99% (HEPA filter recommended), or wet methods for dust cleanup. Do not dry sweep or use compressed air for cleanup of dust. Environmental Exposure Controls • Follow best practice for site management and disposal ofwaste.
PAGE 8
Section 10: Stability and Reactivity Reactivity • No dangerous reaction known under conditions of normal use. Chemical Stability • Stable under normal conditions. Possibility of Hazardous reactions • Hazardous polymerization will not occur. Conditions to Avoid • No dangerous reaction known under conditions of normal use. Conditions to Avoid • No dangerous reaction known under conditions of normal use. Incompatible materials • None known. Hazardous decomposition products • None known.
PAGE 9
Section 11: Toxicological Information Information on toxicological effects • The potential for hazardous component release occurs during installation of the product and specifically during cutting, drilling, crushing, etc. activities that generate dust. Hazardous components are not expected to be released once the product is installed. Other Material Information COMPONENT NAME CAS DATA Quartz (25% TO 55%) 14808-60-7 Tumorigen/Carcinogen: ihl-rat TCLo:50 mg/m3/6H/71W-I Titanium dioxide (< 0.
PAGE 10
• When used under normal conditions, this product is not considered a carcinogen. This product contains crystalline silica. IARC Monographs on Evaluation of Carcinogenic Risk of Chemicals to Humans (Monograph 68, 1997) concludes that there is sufficient evidence for the Carcinogenic Effects carcinogenicity of crystalline silica to humans, IARC (Group I). Crystalline Silica is classified as a known Carcinogen, according to the NTP.
PAGE 11
14.1 UN Number 14.2 un proper shipping name 14.3 Transport Hazard Class(es) 14.4 Packing Group 14.5 Environmental Hazards DOT NDA Not Regulated NDA NDA NDA TDG NDA Not Regulated NDA NDA NDA ATA/ICAO NDA Not Regulated NDA NDA NDA Waste Treatment Methods Special precautions for user • None known.
PAGE 12
Section 16: Other Information Last Revision Date • September 15, 2017 Preparation Date • February 1, 2014 Disclaimer/Statement of Liability Reasonable care has been taken in the preparation of this information, but the supplier gives no warranty of merchantability or of fitness for a particular purpose. Any product purchased is sold on the assumption the purchaser will make his own tests to determine the quality and suitability of the product.