Instructions / Assembly

ManualsBrandsAllure ManualsBath36 in. x 36 in. x 80 in. 3-Piece Glue-up Shower Wall in Carrara Marble

Natural Stone Shower

Wall & Pan

Installation Instructions

Toll Free Phone: 1-866-843-8453

Email: info@halsteadintl.com

Web: http://www.mydiygenius.com

Shower Wall

& Pan Systems

SWP Instructions English-French.indd 1 11/16/11 3:37 PM

Summary of content (6 pages)

PAGE 1
Shower Wall & Pan Systems Natural Stone Shower Wall & Pan Installation Instructions Toll Free Phone: 1-866-843-8453 Email: info@halsteadintl.com Web: http://www.mydiygenius.com SWP Instructions English-French.
PAGE 2
1 36” 2 84” Note: double-up studding at front for Cam and Shower Door installation (refer to Steps 14 and 24) (minimum) 36” 3 allowance for shower head 4 Ensure allowance is made for Backer Board material and Allure Natural Stone Wall panels, when laying out plumbing Dry fit Allure Shower Pan to ensure proper fit and spacing before using mortar cement to install Shower Pan Recommended for use: Custom Building Products SpeedSet Fast-Setting Thin-Set Mortar Grey allowance for faucet 5 6 HANDY
PAGE 3
7 8 Which shower panel do I install first? Installation requires 1/2” backer board material. Use backer board manufacturer recommended screws NOTE: Plumbing hardware could be located on the left, right or center shower panel. Be sure to dry fit prior to final installation.
PAGE 4
13 14 NOTE: Apply adhesive 2” from edge to allow for trim kit pieces. See Step 22. 20” 20” 20” 20” 15 Repeat Steps 12 to 14 for right hand shower panel Use No.10 x 2” screws minimum. Ensure Cam handles are in the DOWN position for LEFT side shower panel.
PAGE 5
18 19 Tighten Tommy Bars until all 3 shower walls are pressed flat into adhesive and backer board material 20 21 24hrs NOTE: Retighten Edge Cams after tightening Tommy Bars © Vertex Services Limited, 2011 SWP Instructions English-French.
PAGE 6
22 23 Install Edge Trim kits starting from bottom and moving up. Recommended for use: Custom Building Products SpeedSet FastSetting Thin-Set Mortar Grey Recommended for use: Custom Building Products Polyblend grout matching silicone. 24 Install plumbing fixtures and fittings HANDY HINT Allow Edge Trim to dry 24 hours before installing shower door. Follow shower door manufacturer’s instructions to install door. When drilling into natural stone, use diamond or carbide tip drill bits.