Instructions / Assembly

© Vertex Services Limited, 2011
1413
15 16
17
20”
20”
20”
20”
NOTE: Apply adhesive 2” from edge to
allow for trim kit pieces. See Step 22.
Repeat Steps 12 to 14 for
right hand shower panel
Use No.10 x 2” screws minimum.
Ensure Cam handles are in the DOWN
position for LEFT side shower panel.
Also ensure Cam handle is pressed tightly
up against shower panel edge prior to
fastening Cam to wall with screws
Ensure Cam handles are in the UP
position for RIGHT side shower panel.
Also ensure Cam handle is pressed tightly
up against shower panel edge prior to
fastening Cam to wall with screws
Hand tighten all six
Cams to close any gaps
at rear corner seams
45° connector (x 2)
Patented Allure Shower Wall Installation Tool (3 sets)
Short tube (x 2)
90° connector Threaded socket (x 2)
Tommy bar (x 2)
Long tube (x 2)
SWP Instructions English-French.indd 4 11/16/11 3:38 PM