User Manual GSM Mobile Phone Model F2 CRONY
TABLE OF CONTENTS 1 POINTS OF ATTENTION ON SAFETY........................................................... 4 2 YOUR MOBILE PHONE ............................................................................... 6 2.1 PARTS DEFINITION ..............................................................................................6 2.2 OPEN THE BACK COVER ........................................................................................6 2.3 DESCRIPTIONS OF ICONS ON THE STATUS BAR ...............
5.10 SETTINGS ........................................................................................................26 5.11 FILE MANAGER .................................................................................................28 5.12 SERVICES ........................................................................................................28 5.14 EXTRA:...........................................................................................................33 5.15 USER PROFILES ...
1 Points of attention on safety IMPORTANT! Please read these instructions carefully and follow them implicitly in case of any dangerous or illicit situations. Note driving safety It is strongly recommended that you do not use a mobile phone when driving. Please use the personal hand free package when a call is inevitable.
phones included, will affect its performance. Other electronic equipment may be affected as well. If you have any question in this regard, please consult relevant doctor or equipment supplier directly. Interference Any interference caused by wireless equipment can do damage to its performance. Qualified services Only qualified services are allowed to install or repair mobile phones. If you install or repair it by yourself, you may break the guarantee rules.
completely depended on mobile phones. You can consult and check with you local network suppliers. 2 2.1 Parts Definition 2.2 Open the back cover Your Mobile Phone Push the back cover upwards.
2.
3 Start to Use 3.1 Insert SIM Card PIN (personal identification number), PIN2, PUK (personal unlock key), IMSI (international mobile subscriber identification) number, network information, phone book and SMS (short message service) and other data are stored in your SIM card. Steps: 1> Hold the power key to turn off your mobile phone, and remove the battery cover and then the battery. 2> Note: don’t pull out the extractor when inserting the SIM card. Firstly, inserting the side with the unfilled corner.
3> When the battery is charged, the power indicator of the battery icon will be constantly changing until the battery is full. Note: The actual standby time and calling duration are related to the use of the mobile phone, the local network environment, the SIM card and actual settings. Warm reminders about battery: Please don’t store your mobile phone battery at an extremely high or low temperature, for it will affect the service life of the battery, and shorten the standby time.
temperature condition. 4> Don’t dismantle or modify the battery. 5> Don’t put battery in an occasion with strong mechanical impact, or use a hard object to penetrate the battery. 6> Battery should be put in a cool and dry place to avoid direct sunlight. It should not be placed with a high temperature (over 60 Celsius degrees) environment. 7> If battery gives out any peculiar smell or getting overheated, you should stop using it.
phone is 1122. 3> If you are required to enter the PIN code, entering the PIN code and pressing the menu key. As to a newly subscribed SIM card, the PIN code is provided by the network operator. 4> Entering the standby interface. 5> Holding the power to switch off the mobile phone. 3.5 Use Passwords A series of passwords have been set in your mobile phone and SIM card, for they can prevent any unauthorized use of your mobile phone and SIM card.
the card: 1> Enter the correct PUK code in line with the prompt on the screen to unlock the SIM card. 2> Then enter a new PIN code and press the OK soft key. 3> When you are prompted to reenter the new PIN code, reenter the new PIN code and press the menu key. 4> If the PUK code is correct, the SIM card will be unlocked, and the PIN code is reset.
the locked PIN2 code. The PUK2 code is provided by the manufacturer together with the SIM card. If the PUK2 code has not been provided, please contact your network operator. If you have entered the PUK2 code incorrectly for ten times, you will be unable to use the functions of the PUK2 code. If you want to use these functions, please contact your network operator to change a new card. Prohibition password: When you operate the call restriction function, the prohibition password is needed.
4 Common Functions Make a call 1> Enter the area code and phone number under the standby mode, and press the dial key 1 or dial key 2 to dial the number you have entered. 2> Press the power key to end the call. Correct wrong input Pressing the right soft key or the delete key to delete the wrong information and hold the right soft key. Redial a previous number: Press the dial key to enter the dialed record list, and press it directly to make calls. 4.
ongoing call can be switched into the held status while the kept call, vice versa, thereby enabling you to speak to the other caller. This function is in Options, the interface is conference, only appears during the call. Call hold: If this function is supported by the network, you can answer another call during an ongoing call. Mute: This function can activate or deactivate the microphone and other connected microphone of the mobile phone. It can prevent your voice heard by others.
5 Menu Function Here we have listed the available functions, after browsing you will have a good understanding of how to operate your mobile phone. 5.1 Messaging 4 Message function is a network service. You may need to subscribe to the service from your network operator prior to sending and receiving short messages. Write Message 5 You can create a new short message here. 1> Sent to: You can send a message to a contact which is in the telephone directory or input a new contact number.
Note: When you add picture, sound and subject into SMS, it will be automatically switched to MMS. Inbox 1> View：Enter to view and edit received messages (SIM 1 & SIM 2). 2> Reply: Directly reply short messages. 3> Call sender: Call the sender who sent the short message. 4> Forward: Directly forward this short message to others. 5> Delete: Delete the short message. 6> Delete all: Delete all messages in inbox. 7> Save to phonebook: Add the sender's telephone number into the phonebook.
2> Multimedia message: Set some relevant parameters of multimedia message. Phonebook Telephone number can be saved in both SIM card and phone. The storage capacity of the phone is 2000. The storage capacity of SIM card depends on the type of SIM card. After select Phonebook, by pressing “Options” you can select View / Edit / Delete / Copy / Send contact / Mark several / Phonebook settings. 5.
incoming call ring tone. 4> Refresh list: Updating the music file list under the root directory of the U disk. When the automatic play list generation is set at ON, it is available. 5> Settings: Player settings: A: Pre. Playlist: The list for Memory card or Phone. B: List auto gen.: Two statuses ON and OFF are available.
"Mass storage". 2> Copy the setup program into the memory card. 3> Select the application to install. 4> Select "Launch" after the installation. 5> Enter Amusement JAVA menu to select the game. 5.7 Multimedia Camera Press left soft key to enter camera preview, and press left soft key again, you can see the following items: Photos: 1> View: Browsing a selected photo file. 2> Browse style: You can check photos either with the list mode or the matrix mode.
4> Contrast: Set the contrast high/medium/low. 5> Anti-flicker: Set the Anti-flicker 50HZ/60HZ. 6> Delay timer: Set the Delay timer 15 sec/10 sec/5 sec/off. 7> Cont. shot: Set the Cont. shot 1 shot/3 shot/5 shot/off. Image settings: 1> Image size: Touch the screen can enlarge or reduce the image. The larger the photo is, the more storage space will be taken up. White balance: Available options including: auto, daylight, tungsten, fluorescent, cloud and incandescence.
4> Anti-flicker: Set the Anti-flicker 50HZ/60HZ. Video settings: 1> Video quality: Set the Video quality Normal/Good/Fine/Low. 2> Size limit reached: Set the Size limit reached 95K/195K/295K/No limit. 3> Time limit reached: Set the Time limit reached15sec/30sec/60sec/ No limit. 4> Record audio: Set the Record audio on/off. White balance: Available options including: auto, daylight, tungsten, fluorescent, cloud and incandescence. Please select this parameter in line with the actual environment.
Sound Recorder: Three recording formats are supported: WAV, AMR and AWB. Users can select a format with the setting function of the option to record. Recording is stored in the [Audio] directory under the file management directory. The sound recording can only be stored in memory card. FM radio 5.8 Games Java Game：it should be download the supported program and file to support. Games support Jar format, download from the internet to the phone and install.
network operator, the hidden number and the sent number. The ex-factory default status of the mobile phone is the system preset number. Call waiting: 1> Activate: If it is being operated, you can receive the alarm from the network the moment you have got an incoming call during an ongoing call, and the number of the new call will appear on the screen. 2> Deactivate: If it is switched off, no alarm can be received from the network the moment you have got an incoming call during an ongoing call.
the user stays abroad, the user can only call the local numbers of the foreign country or the numbers in the host country (that is the country of the network operator). 2> Incoming calls All calls: When this function is on, no incoming calls can be answered. When roaming: When this restriction is on, you are unable to answer calls when you use the mobile phone out of the attributive service area.
Call Time Display: The function of call time display of the switch settings Call Time Reminder: In this menu can be a certain length of time for the call. Auto Quick End: When you open automatically limit the call at the time you set a time, the call will automatically end. Reject by SMS: When you refused to answer the phone, you can informed the caller by messages. Settings Dual SIM settings: Dual SIM open: When you select this mode, two SIM cards can access to the net at the same time.
Pref. input methods: You can choose the input methods. Display: 1> Wallpaper: Users can use either the photos provided by the mobile phone or those downloaded themselves as the wallpaper. 2> Screen saver: Set the screen saver photo and the time. Firstly setting the screen saver status at ON, then setting the time, lastly selecting a screen saver photo or 3D cartoon. Users can use either the photos provided by the mobile phone or the photos or 3D cartoons downloaded themselves as the screen saver.
changed. Phone lock: Enable or disable phone lock. Note: The phone's default password of factory setting is "1122". Auto keypad lock: Set time limit for auto keypad lock. Change password: Set new phone passwords. Factory default settings of the phone will be restored after this function is selected. Phone lock password is required, which is "1122" by default. Sound effects: 1> Audio effect: Set the Audio effect Off/Equalizer/Reverb effect/3D surround 2> Bass enhancement: Set the Bass enhancement On/Off. 5.
To: The receiver should be an email address. CC: Copy the email to an email address. BCC: Copy the email as a blind copy to an email address. Subject: Set the subject of the email. Priority: Set the priority of the email. Attachment: Set the attachment. Content: Edit the content of an email, and the user can add characters and select the email template. Inbox Select an email, and press the left soft key “Read” to read the mail.
Drafts Save the mails you save to the drafts. Select an email, and press the left soft key “Read” to read the mail. And in the mail screen, press the left soft key to choose from the following options: Edit: edit this mail. Mark as deleted: mark the email as deleted, remind you have read the mail and can delete. Delete: Delete this mail. Delete all Emails: delete all mails in inbox, outbox, sent box, drafts. Delete all marks: delete all mails you have set deleting mark.
3) Incoming server (1) Incoming server: to set incoming server pop3 address. For example: pop.yahoo.com. (2) Incoming port: to set the incoming port, the default value is 110. (3) User name: to set your email address. For example: Eric@yahoo.com (4) Password: to enter your email password. (5) Download options: the default value is: Download all. (6) Copy on server: to set backup your email on server or not. (7) Del server Email: to set when you download the email will delete the mail in server or no.
Twitter Web Enable you directly log onto twitter webpage. Gmali Enable you directly log onto gmail webpage.
Extra: Calculator: You can use it to perform adding, deducting, multiplying and dividing calculations. Press the left soft key under the standby status to enter the main menu, and then select the mobile assistant and calculator in turn to access the calculator application interface. You can enter numbers by pressing the number keys from 0 to 9 and press the up, down, left and right direction keys to select the desired calculation.
b>Vib. Only: Vibration only and no ring in case of an incoming call. c>Vib. and ring: Both ring and vibration in case of an incoming call. d>Vib. then ring: Ring after vibration in case of an incoming call. Ring types: a>Single: Ring only once in the case of an incoming call. b>Repeat: The ring tone will continuously play in the case of an incoming call. c>Ascending: The ring tone will continuously play with a rising volume in the case of an incoming call.
After the mobile phone is connected with the Bluetooth earphone, it will automatically enter the Bluetooth mode. The start option is not severed. See the "General" section in details. Connectivity Bluetooth Activate/Deactivate Bluetooth equipment: To activate the Bluetooth equipment: Organizer -> Bluetooth -> Power. If the Bluetooth equipment is power on, the mobile phone will automatically connect the hand free equipment previously used.
6 Input method explanation The version of this mobile phone support English. All the languages can be used not only in the main screen and menus, but also in the Text message, phonebook, etc. by appropriate input methods. Appendix l Trouble Shooting Trouble The phone cannot be switched on Battery cannot be charged Fail to register to the network Can not call out Possible reasons 1. Any power in the battery? 2. Is the battery installed properly? 1.
Cannot call in Unable to set functions PIN locked PIN2 locked Call charge meter invalid SIM error Photo taken is too dark Photo taken is too blurred Photo taken is distorted 1. Is the SIM card registered in the network? 2. Incoming call prohibited due to call charges not paid? 3. Is call diverting enabled? 4. Is the "Bar incoming call" function in call barring enabled? The network operator doesn’t support, or requires registration. Please contact the network operator.
DECLARATION OF CONFORMITY Nr. ….. We, SC VISUAL FAN SRL, importer located in Brasov, 16 Liliacului STR., registered at the Commerce Chamber Brasov no. J08/818/2002, CUI 14724950, assures, guarantee and declare on our own responsibility, in accordance with art.5 from HG nr. 1.
