User’s Manual for GSM/GPRS Digital Mobile Phone Model No.
Congratulations on your purchase of the GSM mobile phone. Please read this User Guide before you use your mobile phone. Notice: If there is any difference (such as features etc.) between the User Guide and the mobile phone, please refer to the mobile phone. Improvements and changes to this User Guide maybe made by our company at any time and without notice. Such changes will, however, be incorporated into new editions of this User Guide.
Table of Contents 1.FOR YOUR SAFETY................................................. 6 2.PRODUCTS INSIDE PACKAGE ............................. 7 3.SPECIFICATIONS..................................................... 7 4.APPEARANCE SKETCH ......................................... 9 5.DESCRIPTION OF KEYS....................................... 10 6.ICON INDICATORS ................................................ 11 7.GET STARTED......................................................... 12 7.
9.CONNECTIVITY ..................................................... 17 10.2MESSAGES ................................................................................ 18 1.1.1SMS.................................................................................................18 1.1.2MMS ...............................................................................................21 1.1.3Chat .................................................................................................23 1.1.
10.7ORGANIZER................................................................................ 36 1.1.24Bluetooth .......................................................................................36 1.1.25Alarm ............................................................................................37 1.1.26Calendar ........................................................................................38 1.1.27Day Schedule..............................................................................
1.For your safety SWITCH ON SAFETY Do not switch your product on when mobile phone use is prohibited or when it may cause interference or danger. DRIVE SAFETY Obey all local law. Unless there is an emergency, otherwise do not use the device when you are driving a vehicle without safety wireless equipment. SWITCH OFF IN HOSPITALS Follow any restrictions. Switch your product off when near the medical equipments. Otherwise it may affect the normal operation of medical instruments.
INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. BATTERIES AND CHARGERS Use only approved batteries and chargers. The use of any other types may invalidate any approval or warranty, and maybe dangerous. 2.Products inside package Unpack the phone gift box and confirm that the following products are perfect. If any item is missed, please contact with the local distributor.
GSM850 / GSM900 / DCS1800 / PCS1900MHz 2.
4.
5.Description of Keys Short press: Press the key briefly Long press: Press the key for more the 2 seconds Function description Key Type (in standby mode) Short press Enter Shortcuts LSK Short press Enter phonebook RSK Short press Show call log of SIM card 1 Short press Show call log of SIM card 2 Long press Enter camera application Short press End a call Long press Power off Short press Enter main menu OK Input number in dialing screen 0..
6.
Indoor mode of profiles is active now Headset mode of profiles is active now Bluetooth mode of profiles is active now Calls to SIM Card 1 are forwarded to another number according to the scheduled “call divert” conditions Calls to SIM Card 2 are forwarded to another number according to the scheduled “call divert” conditions One or more alarms are active Keypad lock 7.Get Started 7.1Insert / Remove the battery Take off the rear cover of the mobile phone.
and then press the other end to install the battery. Lift the battery up from the bottom end of the battery and take the battery out. ⌧ WARNING: Always switch your product off and disconnect the charger before removing the battery. 7.2Insert / Remove SIM card The device is dual SIM cards dual standby phone. It can support 2 SIM cards. Card inserted in card slot 1 is SIM 1; Card inserted in card slot 2 is SIM 2. Before changing the SIM card, please make sure your product is switched off.
7.3Insert / Remove T-flash card Make the end of T card with metal surface face inside and downward and aim at the T card slot of the phone, then insert SIM card to the card slot of the phone. When taking out T card, directly pull it outward and then can take out the card. 7.4Charge the battery The phone will release the warning tone indicating the insufficient electric quantity with the indication of the empty battery icon when the electric quantity is lower.
Please make sure the battery is inserted correctly. Connect the power cord to the device and then connect a compatible charger to a wall outlet or connect with the computer via USB data cable. (There are two charging interfaces, one is Nokia compatible charging interface and the other is normal USB charging interface.) The battery icon on the screen will flash when the phone is being charged. After completion of charging, the full battery icon will display on the screen.
mode in settings is active and these 2 SIM cards are all available, you need chose which one is the initiator: SIM1 or SIM2. Also, you can make a call through phonebook list or call history directly. 8.2Answer a call To answer a call, press or key when the call is incoming. key. To reject the call, press Or you can press to enter options to select the operation you want to do. If you set “any key answer” in profile, press any key (except or key) to answer this call. 8.
DTMF – to enable/disable DTMF. 9.Connectivity This mobile phone offers options to connect to another device or computer. Wireless solution includes Bluetooth. It also supports a wired solution with a USB (Universal Serial BUS) cable connection. USB cable connection Using a USB data cable, you can connect the mobile phone to a compatible computer. If the phone is powered off, you will see the driver in your computer.
Add a new record to phonebook list, including name, number, etc. you can select the position to store: phone, SIM1 or SIM2. The content of every record in SIM card is composed of name and ONE number. Batch operations Multi Delete – delete the selected items in phonebook list Copy all—copy items from SIM Card 1 to phone, or from phone to SIM Card 1, or from SIM Card 2 to phone, or from phone to SIM Card 2, or from SIM Card 1 to SIM Card 2, or from SIM Card 2 to SIM Card 1.
> SMS setting > SIM1/SM2 message settings > profile settings > profile (1..4) > Edit 2. If there no number shown, chose the item to EDIT, especially the SC address, enter the service number, when finished, press to save. You are notified when you receive a message. Messages are automatically saved in the phone memory or SIM card according to your setting. To save messages on phone/SIM From standby mode, select MENU > Messages > SMS > SMS settings > SIM 1/SIM 2 message setting > preferred storage.
Inbox List all received SMS (including read and unread). SIM Card 1 Inbox: received messages via SIM card 1. SIM Card 2 Inbox: received messages via SIM card 2. When a message is focused, press , you can see the details of this message. Press , options as below: Delete – to delete this message directly. Delete all – to delete all the messages in this Inbox (SIM, Phone or both) Edit – to edit a new message. Forward – to transfer this message to some other.
Erase – to set this template empty Write message – to use this template to write a new message. SMS settings Profile setting – to edit the profile name, SMS service center number, SMS validity period, SMS type. Common settings – to enable / disable the delivery report and reply path Memory status – to show the status of storage (SIM card and phone) Preferred storage – to set where the message store firstly.
use Add picture – to add a picture to the message content Add audio – to add a audio resource to the message content Add video – to add a video resource to the message content Add attachment – to add some files to the message content Add slide before – to insert a new slide before this slide Add slide after – to insert a new slide after this slide Delete slide – to delete current slide Next / Previous slide – to change to next / previous slide Add bookmark text – to insert a bookmark
1.1.3 Chat You can chat with others through SMS. Input your nickname and your friend’s phone number, then start to chat. Please act it follows menu hints. 1.1.4 Voice mail server This function needs support from the OPERATOR, Please consult with them about the details and voice mail number. You need to input your name and voice mail number. You can connect to the voice mail server to listen to the voice mail. 1.1.
you can choose: Delete – to delete current record; Save to phonebook – to save current record’s number to phonebook Call – to make a call to current record Edit – to edit the number and save it to the phone book Send SMS – to write a new SMS and send to current record Send MMS – to write a new MMS and send to current record Add to black list – to add current record to blacklist Delete SIM Card 1 / SIM Card 2 call log To delete missed calls, dialed calls, received calls or delete all.
1.1.7 General call settings Speed dial Speed dial allows you to make a call by pressing and holding <2~9> key in the standby mode. Enable Speed dial – to active or inactive speed dial Set number –To assign a number key a phone number, press
Call Time display To show / hide the duration of current call when you are making a call. Call time reminder To set the reminder as none, single or periodic, when select periodic, you should enter the period (from 30 to 60 seconds) Black list To disable a call from number stored in black list when the status is on. You can input black list number directly or select from phone book. Auto redial To enable / disable auto redial function.
Tone setup – to customize the tone of SIM Card 1 / SIM Card 2 incoming call, Power on / Power Off, SIM Card 1 / SIM Card 2 message, keypad tone, there is a list for you to choose. Volume – to set the volume for ring tone and keypad tone. Alert type – to select one type from ring, vibrate only, vibrate and ring or vibrate then ring. Ring type – to set the type from Single (only once), repeat to Ascending. Extra tone – to enable warning, error, camp on, and connect tone.
Show owner number – show / hide the number of SIM Card 1 / SIM Card 2. Time and date You can set the home city, current time and date, and the format to show Schedule Power on/off To set scheduled power on /power off time as you like. Language To change the system language as you like. Preferred input method To set the default input method when you write messages, or edit character strings, sometimes you also can changed the method during editing via ‘input method’ or press <#>.
1.1.10 General call setting Same as General call setting in Call center 1.1.11 Network setup To set network selection mode and Preferred network for SIM Card 1 / SIM Card 2. 1.1.12 Security setup To manage your mobile phone security and to make it safe. SIM Card 1 / SIM Card 2 security setup SIM Card 1 / SIM Card 2 Lock If “SIM card lock” is activated, each time when you power on your phone, you will have to input PIN code.
NOTES: the default phone password is 1122, please change it as soon as possible after you get your mobile phone. Auto keypad lock To enable (also need set the waiting time) or disable the automatic keypad lock in standby mode. NOTES: If the keypad is locked, please do the action according the popup hint on the screen to unlock the keypad, or the keypad does NOT work. Change password To change the password of your mobile phone.
1.1.14 Restore factory settings To restore the original device settings. To do this, you need your phone password. After resetting, the device will power off. 10.5Multimedia 1.1.15 Camera To preview and capture the images. In preview state, press to enter the Options menu, you can choose: Photos – to view the images already exist in photo album and specific operation you could refer to chapter 10.5.2 image viewer..
View – to view current image Browse style – to change the display style of image list Forward – to set current image as wallpaper, screen saver, power on / power off display, image for somebody or caller group in phonebook, or to transfer current image via MMS, or Bluetooth.
Play – to play current video file Forward – to transfer current file via MMS or Bluetooth to some others. Rename – to change name of current video file Delete – to delete current video file Delete all files – to delete all video files in current folder Sort by – to sort the files in view list according to name, type, time, or size. Bluetooth settings – to set the Bluetooth parameter when use Bluetooth headset 1.1.19 Audio player To play the audio files stored in T card.
1.1.20 Sound recorder To list all the record files, if the folder is empty, press to select “Record” to start a new record, to select “settings” to set the recorder parameters, including file format and audio quality. When start a new record, the animation and time will start, the process is working, you can press to pause or continue, press to stop and save the record with the filename you input.
Power off FM radio. Press , you can choose Channel list – to view the channel list already exist, you can play, delete or edit the channels. Manual input – to set current frequency as you input Preset auto search – to search channel automatically and save the available channels. Settings – to set the status of background play and whether use loud speaker. My information To view the files and folders in memory card.
or record by video recorder. Audio – to store the voice memo recorded by sound recorder. 10.6Fun and Games 1.1.22 Games There are several built-in games. 1.1.23 E-Book reader To read the text stored in storage. Now only support .txt format files.
this application, you can choose Power – to power on or power off the Bluetooth in your mobile phone. Inquiry audio device – to search the Bluetooth devices around your mobile phone. My device – to list records of all Bluetooth devices you found or search new one. Highlight one device and press , you can connect with the device, rename the device, delete the device, delete all devices and show the service list.
1.1.26 Calendar Show the calendar according to the date of mobile phone. Press
1.1.29 Calculator To enter calculator, the functions of key pad are as below: Keys UP UP Down DOWN RIGHT RIGHT LEFT LEFT 0..9 # OK Press type Short press Long press Short press Long press Short press Long press Short press Long press Short press Short press Short press Function + M+ M÷ MR × MC 0..9 Point Get the result 1.1.30 Stopwatch You can measure the lapsed time with this function. Typical Stopwatch: provided with the functions: Split Timing, Lap Timing and View or Delete Record.
service should be different according to your SIM card and OPERATOR 1.1.32 WAP This service is support by OPERATOR, if you do NOT know whether your SIM card supports, please connect with the OPERATOR for more information. Enter this service menu, you can choose Homepage – to enter the homepage via WAP web. Bookmarks – to list all the book marks, you can edit them or enter the bookmark directly; add new bookmarks. Recent pages – to view recent viewed websites and enter them directly.
The account parameters sometimes may changed by the OPERATOR, so if there is some error, please connect with your OPERATOR and change it. 11.Input method There are several input methods supported by your mobile phone, the number of them may change according to the number of languages. Smart ABC/abc Press number keys <2-9> to input word. Each letter is input by pressing a key once. The English input method will forecast your inputting word.
NOTES: in edit screen, you can change the input method via press <#> key, press <*> key to enter symbol selection screen and press<0> to input a space. 12. FAQ These lists just for reference, if your problems can NOT be resolved according them, please contact with the local distributor. Question Can NOT power on Can NOT connect the network There are some popup messages Reason and Solution Must long press the Check the battery is installed correctly.
The voice quality is NOT good during call The standby time of battery becomes short SIM card error The mobile phone is locked, you must input the password. The PIN code is needed if your SIM card is locked by you or some others. The PUK code is needed when you input wrong PIN code 3 times continuously, input the correct PUK code or contact with your network operator. Check whether the volume is suitable. Check the signal strength in signal indicator.
Can NOT make a call Can NOT be called by others Can NOT charge the battery Some functions do NOT work Make sure you press numbers. Make sure you have enough money associated with your SIM card. Make sure your SIM card is valid. Check whether the dialing out function is barred in call settings. Check whether the FDN is set in call settings. Make sure your mobile phone is ON, and the network is connected. Make sure there is enough money associated with your SIM card.
network operator or your SIM card. Make sure the condition needed by this function is meted.
WARRANTY CERTIFICATE IMPORTANT: When buying please verify the integrity and all aspects of the product. Any ulterior claim will not be taken in concideration. In the warranty period the customer needs to keep the original package of the product. WARRANTY CONDITIONS: To benify the warranty, the customer needs to respect the attached instructions. Only authorised persons may intervene on the product for service.
If necessary, Visual Fan will replace the product in accordance with this warranty (unless otherwise required by law). Visual Fan Ltd warrants that the products do not have material or workmanship defects. The products are according to all appliable certification standards, as electrosecurity and low voltage. All the certificates and test result are available at the headquarter of Visual Fan. The warranty period is 24 months and it starts at the time of product's original purchase by the first end-user.
-product has scratched display, ripped of keypad, broken housing -defects caused by the fact that the battery has been shortcircuited or by the fact that the seals of the battery enclosure or the cells are broken or show evidence of tampering or by the fact that the battery has been used in equipment other than those for which it has been specified.