Operation Manual

 Tone setup – to customize the tone of SIM Card 1 /
SIM Card 2 incoming call, Power on / Power Off, SIM
Card 1 / SIM Card 2 message, keypad tone, there is a
list for you to choose.
 Volume – to set the volume for ring tone and keypad
tone.
 Alert type – to select one type from ring, vibrate only,
vibrate and ring or vibrate then ring.
 Ring type – to set the type from Single (only once),
repeat to Ascending.
 Extra tone – to enable warning, error, camp on, and
connect tone. If one of them is marked, the associated
information will cause a sound.
 Answer mode – If “any key” is marked, When this
function is activated, you can answer a call by press
any key except <RSK> or key.
As a hide profile, the device will enter / exit SILENCE when you
long press <#> in standby mode, which without vibration and
without any sound or melody.
1.1.9 Phone Setup
 Display characteristic
 Wallpaper – set the wallpaper image
 Screen saver – set the screen saver status, images /
animation and waiting time.
 Power On/Power off display – set the image /
animation when system turn on / turn off
 Show date and time – show / hide date and time in
standby mode