Operation Manual

1.1.10 General call setting
Same as General call setting in Call center
1.1.11 Network setup
To set network selection mode and Preferred network for SIM
Card 1 / SIM Card 2.
1.1.12 Security setup
To manage your mobile phone security and to make it safe.
 SIM Card 1 / SIM Card 2 security setup
 SIM Card 1 / SIM Card 2 Lock
If “SIM card lock” is activated, each time when you power
on your phone, you will have to input PIN code. If you input
mistaken PIN code three times continuously, SIM card will
be locked. You will have to get PUK1 code to unlock it.
Please contact network operator to get PUK1 code when
necessary.
The default PIN code is 1234.
 Fixed dial
Edit the FDN list. You can open or close the FDN function.
 Barred dial
After “Barred dial” function is activated according to
different restricted conditions, you can restrict the call
under the corresponding conditions (need to apply to
network operator for support).
 Phone lock
To change the phone lock status, if the status is on, the
phone password is needed when power on.