Operation Manual

English
9
2.2 Insert and Remove the SIM Card
Switch off the device, and remove the battery and other external
power supply.
Insert the SIM card into the card slot as the picture indicated.
Please switch off the phone and remove the battery before removing
the SIM card.
Warning: Damages could happen to your SIM card if the device is not switched
off when taking out of the SIM card.
Attention: SIM1 (left side in the picture) supports WCDMA network while SIM2
(right side in the picture) supports GSM network. This device is a dual SIM
cards dual standby mode cell.
2.3 Insert/Remove the Memory Card.
Switch off the handset.
Insert the memory card into the slot and lock the slot as indicated in
the picture.
Attention: This handset doesn't support the hot-swap of T card.
When you need to take out the inserted card, please switch off the device before
taking out the memory card.