Table of Contents 1.For your Safety……………………………………3 2.Mobile Phone Profile……………………………..7 3.Preparation before Use……………………………10 4.General Instructions for Mobile Phone…………..18 5.Basic operation…………………………………...28 6.Use Menu Functions ……………………………...35 6.1 Message………………………………………..35 6.2 Phonebook…………………………………….50 6.3 Call center……………………………………...54 6.4 Multi-media……………………………………62 6.5 Fun & Game………………………………….72 6.6 Setting……………………………………….80 6.7 Net work……………………………………80 6.
6.9 File manager……………………………….99 7.English Editor Opertion………………………...106 8.Use USB…………………………………………106 Ⅰ……………………………………..107 10.Appendix Ⅱ……………………………………111 11.Appendix Ⅲ …………………………………112 9.
1. For your Safety For your safety and proper use of the mobile phone, please read the following guidelines carefully: Do not switch the mobile phone on when close to chemical factory, gas station or other explosive objects. During driving, please use headset for safety purpose; unless otherwise in emergency, do stop the car on roadside to have a call conversation. Because the use of the mobile phone can cause interference in the aircraft, never use the mobile phone in aircraft.
lose guarantee. Do not dismantle the mobile phone without permission. In case of failure, please contact the supplier as soon as possible. Do not plug the charger into the mobile phone and charge without battery. Always power off the mobile phone when taking out the battery; otherwise the memory of the phone may be damaged. When charging the mobile phone, always keep it in the place with good ventilation, heat sink and away from flammable and explosive objects.
Do not use the mobile phone in the environment at too high or too low temperature, never expose the mobile phone under strong sunshine or too wet environment. The suitable temperature for the phone and accessories is 0 ℃-40℃. The height to use the phone shall be less than 2,000m. Do not use liquid or wet cloth with strong cleanser to clean the mobile phone. This mobile phone has shooting, videoing and audio recording functions, which shall be used as per the related laws and regulations.
deserted battery according to the provisions where they are definitely made. Tip: This user manual is based on simplified Chinese operation mode, so it may vary in English operation mode. Warning: We will not be bear any responsibility for any incompliance with the above guidelines or improper use of the mobile phone. Our company keeps the right to make the modifications to any of the content here in this user guide without public announcement in advance.
2. Mobile Phone Profile The mobile phone has a standard keypad, a single screen. In addition, it is inbuilt with one vibration motor, one charger/data common transmission port and one exterior memory card (T-Flash card) port.
(Below is the side of the mobile phone) USB port 8
(Below is the back of the mobile phone) Camera Speaker Battery Cover 9
3.
When registering mobile phone number, you can apply for two different phone numbers, two different mobile phone network service providers and thus obtain two SIM (Subscriber Identification Module) cards. With these two SIM cards, you can use all functions of your mobile phone. The SIM cards save the parameters needed for communications and personal data, including PIN (Personal Identification Number) code, phonebook, short message and other extra system services.
Please insert the host SIM card into the SIM1 slot and the slave SIM card into the SIM2 slot. Note: If SIM card is inserted only into the SIM1 slot, then only the host works; likely, If SIM card is inserted only into the SIM2 slot, then only the slave works. When two SIM cards are inserted into the SIM1 slot and SIM2 slot respectively, you can choose work mode freely as you wish.
T-flash card As the mobile phone does not have enough storage space, to use some functions, you need to install a memory card (This mobile phone use T-FLASH card.) Install T-FLASH card: Open the back cover to take out the battery, insert the T-Flash card into its slot, and restore the battery before restarting the mobile phone.
of children’s reach or prevent children from gulping it! Install Battery The original battery and accessories is suitable for the mobile phone. When the battery is idle, it is recommended to put it into the protection box. Note: Do install the battery as per the diagram so as to prevent the battery patch being damaged. Charge Battery The new battery cannot reach the most optimal efficiency unless it has undergone several continuous complete charges and discharges.
used to charge the battery, please firstly check if they are original or recognized by the original manufacturer. The use of other accessories may damage your mobile phone and cause risks! Always use them indoor and dry places. Notices on using the battery The performance of the battery is affected by many factors, including radio barrier, network settings, signal strength, work, temperature, chosen and used functions or settings as well as phone accessories, tone, data or other applications.
if call duration decreases but charging time increases, you need to buy another battery from the original manufacturer or authorized by the original manufacturer. The battery of interior quality can damage your mobile phone and cause danger! If the phone is overused at low battery when charging, there might need a longer time for the charge indicator to be shown on the screen. Note: Please dispose the battery according to the local regulations. Try to recycle the battery as possible.
PIN code PIN1 Code: It is the personal identification number used to enter SIM and able to prevent others using SIM1 without permission. If the mobile phone has activated the PIN1 code protection, when the mobile phone is switched on, the screen will display “Input PIN”. In the process of inputting PIN1 code, the screen will use “*” to represent the input content. While obtaining SIM, you can obtain its PIN1 code.
4. General Instructions for Mobile Phone Dial key It is used to dial a call (with phone number entered or in phonebook state) or receive an incoming call. In standby state, press this key to display the latest call register (SIM1 and SIM2 support respectively 20 call records, including received calls, missed calls and dialed calls). In dual-SIM standby mode, press this key to have an option menu on which you can choose to operate via SIM1 or via SIM2.
the bottom row of the main screen of the mobile phone. Functional direction key This mobile phone has four direction keys, the left, right, up and down control functions. In some interfaces, they have special function, for example, in call state, press the up/down key to adjust volume. Similarly, these four direction keys can be set with shortcut functions.
silence mode. Continuously press shortly or press long * key to input “P”, " " or "W" , among which, “P” and “W” are used for extension calls while “+” for international calls. In music player state, * and # are used to adjust volume. Tip: The difference between “W” and “P” is that “P” will directly send DTMF after 3s seconds while “W” will eject a window confirming whether the user want to send DTMF. FM radio function key Down key: In radio state, press the key to turn on/off radio.
can switch to the corresponding channels saved in the channel list; if they are pressed long, you can save the current frequency to the corresponding channel. *, # key: Adjust volume. Keypad lock When in standby interface, if the mobile phone is idle for certain time, it will be locked automatically. Press the right soft key to release and press the ok key or “*” key again to unlock.
Ring; this icon may vary with different warning modes and it may be in the three icons: Ring after vibration Vibration and ring Vibration Missed calls Unlocked Master line1 Slave line1 Master line2 Slave line2 MMS BUSY MMS unread SIM1 All calls diverted 22
SIM2 All calls diverted Locked SIM1 E-mail SIM2 E-mail SIM GPRS Continuous display indicates the Bluetooth function has been activated and can be searched; flicking indicates data are under transmission. Bluetooth function has been activated and can be searched Disconnected Language and Input Mode The mobile phone has English input mode. For different areas, there are different languages and corresponding input modes.
The mobile phone is inbuilt with vibration motor and buzzer and provides several incoming call modes: Ring Vibration Ring after vibration Vibration and ring Services Services are provided with SIM kit. The mobile phone support service function. The detailed menu items depend on SIM card and the network. When the network provides such function and your SIM card supports such function, the service menu will automatically be posted in the services of the mobile phone.
Dial domestic calls The simplest method to dial a domestic call is to input phone number via the number keypad, then press dial key to dial call. To change phone number, press “C key”. During dialing, the screen will display a cartoon. If SIM card 1 call, "SIM1-" occurs; if SIM card 2 call, "SIM2-" occurs. When the other party is connected, the screen will display the corresponding information. Press end key to end the call.
You can input the Country number according to the common practice, such as, 49 for Germany, 44 for British, 46 for Sweden, etc. Dial international telephone number as following: “+” Country number +Complete telephone number + Dial key. Dial fixed-line telephone extension Some fixed-line telephone extension may not directly get through, so you need to connect to the switchboard at first then put through extension number.
corner on the screen), you can make emergency calls. If your network supplier does not provide roaming service in this area, Emergency will be shown on the screen. That means you can only make this kind of calls. If your phone is under the network coverage, you can even make emergency calls without the SIM card. * In some areas, 112 (emergency call) service is provided by the network operator. In case of failure, consult the network operator.
5. Basic operation Switch on Press the switch-on/off key to start the mobile phone, then the screen will display switch-on image. Then you can enter Settings menu to set phone modes, including SIM1 & SIM2 On, Only SIM1 On, Only SIM2 On and Flight. The defaulted one is Only SIM1 On. After insert SIM card, the mobile phone will automatically check the SIM card availability, and then it will be shown information as following on the display by sequence: 1. “Input phone password”——If you have set the password.
to other network and only can make call to 112. 5. “Searching”—the mobile phone is searching network until find appropriate network; 6. “Operator name”—Indicates network successfully registered. Note: If you do not know PIN code, please contact the network service provider. The defaulted phone password “0000” Switch off To switch off the mobile phone, press the end key. When the screen displays switch-off cartoon, the host and the slave will be off at the same time.
clear key to delete them). Press the dial key to dial the phone number. In SIM1 and SIM2 On state, you can choose to dial a call via SIM1 or SIM2. To end a call, press the end key; or to cancel a dial, press the Cancel key or the switch-on/off key. After the call is connected, you can see the call timer on the screen. Dial a call via phonebook: Enter the phonebook and search the desired name/phone number, and then press dial key to dial call.
Answer a Call When there is a call, as per the settings of the mobile phone, you will be alerted with ring, vibration, vibration and ring as well as vibration then ring. To receive a call, press Dial/Call Key. To refuse a call, press Switch-on/off key or the end key directly. If the CLI (Call Line Identity) is opened, the phone number of the caller will occur on the screen. If this number has been saved in the phonebook, the name corresponding to this number will be displayed on the screen.
Dial Hold If you have applied for dial hold, in the call conversation process, press “Options” to have the following function menus: Hold: Hold the current call but with the line keeping connected. End: End the current call conversation. New Call: Enter the dial interface, dial another call. Phonebook: Enter the directory of the phonebook. Messages: Enter the directory of the SMS. Sound recorder: While having call conversation, you can record the call.
DTMF: You can set whether to send DTMF signals. Note: Some menu items need the support of the local network or can occur in special cases, such as Conference and New Call. Consult the local network operator for details. Fast Read SMS When the user receives unread SMS, the screen will display an icon of unread SMS. Press Read to enter and read the SMS. The SIM card 1 unread SMS icon is marked with “1” and SIM card 2 unread SMS icon is marked with “2”.
notice about voice message. (The voice mail number must be preset). Note: Voice mail needs the support of the local network.
6. Use Menu Functions 6.1 Messages [SMS] SMS is a kind of network service that cannot be used to send and receive short messages until you apply to the network operator Both SIM cards of the mobile phone can send and receive SMS. The SMS is sent to the SMS center of the network and then sent by the network to the target user (GSM user). If the user does not switch on the mobile phone or the mobile phone cannot receive the SMS (the memory is full), the network will save the SMS temporarily.
When the SMS capacity is full, there will be an SMS icon flickering on the standby interface. The full capacity can affect SMS reception. Delete some SMS to solve the problem. If the other party has received SMS, you will hear the alert sound from the mobile phone (if such alert function is set as ON) Note: When sending SMS via the SMS network, the mobile phone may display “Message sent”.
character before the cursor, long press “Clear key” to delete all characters; press the end key to back to the standby interface, press the up and down direction key to choose characters, press “select” key to confirm. The mobile phone can send the chain SMS more than 640 characters (limit for common text messages). If the SMS contains more than 140 English characters, then the SMS will be split into 2pcs or more. You can insert images, cartoons, rings etc into SMS.
Copy Add Number-- Input the number of the receiver. Add E-mail-- Input the e-mail of the receiver. Secret copy Add Number-- Input the number of the receiver. Add E-mail-- Input the e-mail of the receiver. Subject: You can edit the subject of the MMS Edit Content After the MMS is edited, press the OK key to have the following options: Done: Finish the editing of the current MMS. Input Method: You can choose the desired input method. Add Picture: You can insert your desired Picture.
Add slide before: You can add new page before Add slide after: You can add new page after Add bookmark text: You can insert your bookmark Preview: You can preview the editing effect of the MMS. Slide timing: You can set the play time of the current page MMS. Inbox You can see the MMS in the inbox and have the following operations: View: You can view the MMS and save photos, audio and annex. Reply: Reply the sender with MMS.
Forward: You can directly forward this MMS to others. Delete: Delete the current MMS. Delete All: You can delete all MMS in inbox. Save as template: take a new mms as a template Properties: the details of the new mms including subject, date and file size. Use details: View the detailed information of the current message. Outbox If choosing “Save and Send” while sending SMS, you can save the SMS into the Outbox.
number use URL and use Email address. You can view the MMS send and saved in the Outbox and failed and have such operations as view, forward, edit, delete, delete all, save as template, properties, use details. Templates With it, you can pre-edit some common phrases, which is convenient for quick SMS editing. There are some presets MMS in the mobile phone and you can have such operations as View, Details and write message, properties from Template. [MMS] MMS can contain words, sound and photos.
devices. Note: You cannot use photo messages unless the network operator or service provider supports to do so. You can not receive and display MMS unless the mobile phone has the compatible MMS or e-mail function. Drafts You can save the edited MMS into the drafts, and also you can have such operations as view, send, edit, delete, delete all, save as template, properties, use details on the MMS in the drafts. MMS Settings: You can set some parameters of the SIM1 SMS or SIM2 SMS in the menu.
you whether the other party has received the SMS and what the time is. Reply Path: You can send the reply path to the network terminal. This function needs the support from the SMS center. Memory Status: You can view the capacity of the SIM card or the phone for SMS. Preferred Storage: You can set the storage position (SIM or phone) for SMS. You can set some parameters of the MMS in the menu. Compose: Creation Mode-- "restricted" and “free ".
Signature: You can edit the content of the automatic signature. Sending Settings: Validity Period-- You can set the time to save in the MMS service center and send, including 1h, 6h, 12h, 1d, 1w and Max. Delivery report--You can on/off such function. Read Report- You can on/off such function. Priority-- Including Normal, High and low. Slide timing-- The time space when the other side read the MMS. Default is five seconds. Max sliding timing: 60 seconds.
including as home, Delayed and rejected Read Report—on request, Send, never Send Delivery Report-- on and off. Filter: Anonymous-- Allow and reject Advertisement—Allow and reject. Server Settings: In dual-SIM mode, you can separately set SIM1 and SIM2. After choosing Settings, you can have the following settings: Activate profile Edit profile Rename profile-- Set name. Homepage—The website for editing MMS 。 e.g.: http://203.162.21.114/mmsc Data account—mobile-GPRS-mms.
Password-- You can set password. Memory Status: You can see the utilization rate of the mobile phone, including the used space and the free space. [Chat] In standby, choose [Menu/Info/Chat] to enter Chat Room 1 and Chat Room 2 to have a chat. [E-Mail] Before use, you need to set the e-mail in the “E-mail accounts” menu. Via this menu, you can receive and send e-mail. Send and Receive: You can send/receive the e-mail from the specified mailbox. Write E-mail: You can edit e-mails.
Sent: You can see the backup of the sent e-mails. Drafts: You can see the drafts in the specified mailbox. Clear mailbox: You can clear the e-mails in the specified mailbox, including inbox, outbox, sent e-mail backup and drafts, or clear all e-mails. Delete marked Emails: You can delete all marks. E-mail accounts: You can create new account or choose existing account. Template: you can pre-edit some common phrases, which is convenient for quick editing.
Edit: You can set menu function selection. Account Settings: You can set basic transmission parameters, including Account name, Data account, protocol, check interval, Download size, Reply to address. Outgoing Server: You can set the server parameters for the sent e-mails, including outward server, outgoing port, display name and e-mail address etc.
Signature: You can set it on or off and edit the signature. [Voice Mail Server] This is a kind of network service, which cannot be used until you apply to the network operator or open it. Please consult the local service provider for more details and voice mail number. Edit: You can edit name and edit the voice mail number. Press the OK key to save the number. Connect to Voice: You can dial the voice mail number saved in the voice mail number function list.
[Broadcast Message] Broadcast is a kind of information service such as weather report, traffic etc that the network operator sends to the GSM users within certain area. In dual-SIM mode, you can separately set SIM1 and SIM2. Receive Mode: You can ON/OFF such function. Read Message: You cannot read the received information until you open such function. Languages: You can set the language for the received information. Channel Settings: You can choose, add and edit and delete channel number. 6.
sticker, tone, callers’ group (five types: family, friends, VIPs, colleagues and others). Every contact saved into SIM1 and SIM2 can only include name and number. The mobile phone supports 500 groups of numbers. [Quick Search] Input the English letter in the position where the cursor is flickering to position the contact from these contacts that meets the conditions, e.g. search Zhang, input “z” in the input area, then you can find it.
Associate Picture, Associate Sound and Caller Group. Tip: If one contact is set with photo link, tone link and callers’ group at the same time, then the callers’ group function will be inactive. [Copy all] You can copy all contacts from SIM1 to phone, from phone to SIM1, from SIM2 to phone, from phone to SIM1, from phone to SIM2, from SIM1 to SIM2 and from SIM2 to SIM1.
ID, service numbers and emergency numbers (the latter two needs the support of the SIM card; consult the network operator for details). [Phonebook Settings] Memory Status: You can view the current use status of the phonebook, including SIM1, SIM2 and phone memory. The display format is “Used/Total”. Preferred Storage: You can choose the storage path for the current number. Fields: You can choose the display items in the phonebook and the display items in the Add Contact interface.
6.3 Call center In dual-SIM mode, you can separately search the call register of SIM1 and SIM2. In mono-SIM standby mode, you can set the available SIM card and see its call register. Call history includes missed calls, dialed calls and received calls, delete call log, call time, call cost, SMS counter, GPRS counter etc.
Last Call time: With this function, you can view the last call time. Total Sent: With function, you can view the duration of all dialed calls. Total Received: With the function, you can view the duration of all received calls. Reset all time: With this function, you can clear all duration records of calls. Note: The actual call duration and service time in the bill of the service provider may be different from them, which depends on the network functions, accounting rounding and tax etc.
Reset Cost: With this function, you can clear all fee records. Max Cost: With this function, you can limit call fees in the specified pricing unit or currency unit. PIN2 code must be input to set call cost. Price per Unit: This function needs network support. For more details, please consult the network operator. SMS Counter With this function, you can see and preset the number of sent messages and received messages. GPRS Counter Last Sent: You can view the sending traffic of last link.
All Received: You can view the reception traffic of all links. Reset Counter: You can clear all link traffic. General call settings Caller ID: Including set by Network, hide ID and send ID. Set by Network: While having a call conversation, you can send my caller ID in the form preset by the system. Hide ID: While having a call conversation, you will not send my caller ID. If the system does not support such function, call may fail.
active unless this function is activated. This needs network support. Call Divert: This is a kind of network function, which cannot be used unless you apply to the network operator for it. With this function, you can divert calls meeting he conditions to another number. Name Divert All Voice Calls Description The network will divert all voice calls without conditions.
divert it. Divert if Busy Divert All network will divert the call. Network support needed. Data Calls Cancel All Cancel all divert functions. Diverts When you are on line, the Call Barring Outgoing Calls: 1. 2. All Calls: You can bar all outgoing calls. International Calls: You can bar international calls. 3. International Calls Except To Home PLMN: When abroad, you can dial the calls of the current country and the original country (the service providers allows to do so).
1. All Calls: You can bar all incoming 2. When Roaming: You can bar all calls calls. except the calls of the local service area. Cancel All: You can cancel call barring settings and dial/receive calls normally. Change Barring Password: You can apply to the network to change the password for call barring. Line Switching: You can choose Line 1 or Line 2. Closed User Group: This function needs network support. Please consult the local operator for details.
Speedy Dial: You can set whether to activate this function and edit the related speed dialing numbers. If this function is “Active”, then you dial any of the corresponding individual keys (2-9) on the standby interface to dial the number specified for this key. IP Dial: You can set 3 IP calls. Only one IP call can be effective on SIM1 or SIM2. Background sound: Select when making call: If setting it as on, during call, there will be background music coming out.
Call Time Reminder: You can set one alert tone or periodic alert tone for several round minutes during call conversation so that you can understand call time. You can turn off the alert tone. Auto quick end: You can set call duration. After the set time expires, the mobile phone will automatically end the call. Note: Some settings need network support. For example, call barring can not be used unless the local network and SIM card open it. 6.
If the storage space of the mobile phone is insufficient to store the taken photos, it is necessary to delete some old photos or other files in “File Management” function list to release more space. Description of Mobile Phone Options: Options photos Description To view the saved photos. Shutter Sound: sound 1, sound 2, sound 3 and Off. EV: EV-4 ——EV+4 Camera Settings Banding: 50Hz(default), 60Hz Delay Time: 5s, 10s, and 15s or Off. Cont. Shot: 1 Shot, 3 Shot, 5 Shot and Off.
Quality: High, Normal, Low White Auto, Daylight, Tungsten, Fluorescent, Balance Scene Mode Cloud, Incandescence Auto, Night Effect Normal, Grayscale, Sepia, Sepia green, Settings Sepia blue, Color invert Add Frame There are 2 options available. Storage Phone, Memory Card Restore You can restore the recorder to factory Default settings. [Image viewer] All photos taken are saved in the album. Options Description View You can view the selected photos.
and matrix. You can send photo to Wallpaper, Forward Screen saver, Switch-on, Switch-off, Caller picture. You can send it to MMS, Email, and Send Bluetooth. Rename You can rename the selected photo. Delete Delete files You can delete the selected photo. All You can delete all photos in the album. For convenience of search, you can Sort by rank them as per name, type, time and size or choose “None”. Storage You can choose photos storage path (to phone or memory card).
file management capacity. Entering the options, you can have the following settings: Options Description You can set White Balance, EV, camcorder Night Mode and Banding for your Settings recorder so as to have high-quality videos. Video Settings Effect Setting You can set Cartoon Quality There are 6 options available. Restore You can restore the recorder to Default factory settings. [Video player] It supports the videos in AVI.
Options Description It supports the videos in AVI and will Play not be limited by file size. Click the play interface to play. Rename You can rename the specified video. Delete You can delete the specified videos. Delete All files You can delete all files. For convenience of search, you can Sort by rank them as per name, type, time and size or choose “None”. [Audio player] If the operation system is Windows 2000 above, no driver needs installing.
chosen MP3 file to under "My Music" of the mobile disk rather than in such folders as Audio, Images and Photos; otherwise, the file cannot be played. (Only the music in MP3, AMR and MIDI are supportable). Description of audio player options: Options Description Play Play the current chosen music. Details View file name, track, SQ, file size, music duration, music name, singer, music special a music type etc. Add to Add the chosen music into the ring Rings base.
and background play. [Sound Recorder] After choosing “Sound Recorder” and press “OK” to enter, you can the previous record files. Press “Options” to have the following operations: Record: You can record new files. Play: You can play the selected file Append: You can have annex record for the files of the superior level (only for the record files in AMR). Rename: You can rename the chosen file. Delete: You can delete the chosen file. Delete all files: You can delete all files.
profiles and MMS. [FM Radio] Your mobile phone supports FM radio. To use the mobile phone to listen to radio, insert the headset connection cable into the headset port on the mobile phone. The headset connection cable functions as the antenna of the FM radio, so it should hang freely. While listening to radio, you can dial or receive a call normally. During call conversation, the radio will turn mute automatically.
press any of number keys 1-9 to choose the corresponding channel. Option menu Channel list: You can edit and save 9 channels. Manual input: You can edit the specified radio frequency band. The frequency of the radio is between 87.5 MHz and 108.0 MHz. Preset Auto Search: You can have automatic search and save the searched channels into the list. Settings: You can set background play, skin and loud speaker. Record: You can record new files.
[Melody compose] The mobile phone provides custom ring tones of different musical instruments, and adds them into profiles or SMS ring base. 6.5 Fun &Game [Games] This mobile phone provides some inbuilt games. Please refer to the operation instructions attached to the games. Game settings BGM: On or off background audio. Sound effect: On or off audio. 6.
and then activate it. You can have such profiles as General, Meeting, Outdoor, Indoor, Headset and Bluetooth. The content can be edited at every profiles mode as following: Tone Setup: Include Incoming Call, power-on, power-off, Message Tone and Key Tone. Volume: Set the volume of Ring and Key Tone. Alert type: You can choose any one from Ring, Vibration, Vibration then Ring as the current ring mode.
any key to answer. After individualized settings, choose “Activate” in “Select” to start profiles. Note: After the headset is inserted into the mobile phone, the mobile phone will automatically change into headset profile. Unplug the headset to return to the previous profile. In standby state, you can press “#” key to switch to silence profile and again to the previous profile.
In such menu, you can set phone language, standby wallpaper, time etc. Time and Date: With this function, you can set city, time and date format and the time of specific place. Set Home City: You can set different cities. Note: This option must be used together with auto update of time and date. Auto update of time and data cannot be conducted unless the network supports. Set Time and Date: You can set the current time and date.
Special Note: In the area forbidding using mobile phone (such as cabinet), you must confirm to inactivate this function before entering this area so as to prevent accident. Schedule Power on/off: You can set the time for schedule Power on/off. Language: You can choose the desired language for phone display. Preferred Input Methods: You can set the input methods of the mobile phone according to your operation habit.
Shortcuts: Here, you can choose shortcut function menu options; after specifying the shortcut functions for the four function keys, press the shortcut function key to enter this menu. Dedicated key: You can have corresponding Auto update of date and time: To set the mobile settings on the up, down, left and right keys. phone to automatically update time and date according to the current time zone, choose “Activate”.
Misc. Settings: You can adjust the brightness and time of LCD backlight. [Network Setup] In dual-SIM standby mode, you can separately set SIM1 network and SIM2 network. Network Selection: You can search the network again. Select your favorite network and choose to register the network automatically or manually. Preferred Networks: You can set the preferred registered network for SIM card.
When this option is chosen, it is necessary to input PIN code for every insert of the SIM card. Fixed Dial: This function needs the support of the SIM card and the network operator. When it is activated, you can only dial the phone numbers saved in host fixed dial list. To activate it, you need to input host PIN2 code. Barred Dial: You can set barring all or some dials. (SIM card support needed) Change Password: You can change password. Phone Lock: You can set it as On or Off.
When it lasts certain time, the keypad will be locked, including such options as Off, 5s, 30s, 60s and 5min. Change Password: You can change the defaulted phone password “0000” into 4-8-digit number easy to remember. If the phone lock is activated, when switched on, the mobile phone will hint “Phone locked”. To unlock it, you can input the phone lock password and click OK. [Restore Factory Settings] You can restore the factory settings of the mobile phone. The factory setting password is “0000”.
report, news and financial and economic information etc. This function is provided by the network supplier. According to the services the SIM card provides, there will be new menu options occurring. If the SIM card and network do not support this function, it will not be inactive. For more details, please contact the network provider. [WAP] Homepage-- Start the website chosen in the connection settings file. Bookmarks--Yahoo and Sina.
Delete: Delete the chosen bookmark. Delete All: Delete all bookmarks. Add bookmark: Add new bookmarks. Recent pages-- Record the latest 10 web pages browsed. Offline pages-- saved pages Input address-- Input the website to be logged in. Service Inbox-- The mobile phone can receive the service information (“Recommended” information) sent by the service provider.
Rename profile――settings name Homepage-- Edit the pre-browsed website. Data Account-- Choose the desired network ID Connection type-- Continuous link, discontinuous link and HTTP. User Name-- The name of the user. Password-- Set password. Note: The setting method of other WAP settings files is the same as that of “Mobile phone-GPRS”.
Network ID-- Choose the desired network ID. Link Status-- Continuous link, discontinuous link and HTTP. User Name-- The name of the user. Password-- Set password. Note: The setting method of other WAP settings files is the same as that of Mobile phone-GPRS. Browse Options-- You set whether to display images during waiting time and when browsing WebPages. Service Message-- You chooses ON or OFF. Clear Cache-- You can clear cache.
Account Name: FET Number: 0936010010 User Name : blank Password: blank Line Type: ISDN and analogue. Speed: 9.6Kbps, 14.4 Kbps, 4.8 Kbps DNS: 000.000.000.000 GPRS-- The use of GPRS data will be provided with the following ID information, such as Mobile phone-GPRS. Account Name: Mobile phone-GPRS APN: m-WAP User Name: mms Password: set password Auth. type: General and confidential.
services. Consult the local network operator. 6.8 Organizer [Calendar] With this function, you can set the alarm clock to remind you of your schedule and record your schedule. Roll the highlight block to the desired date and then the current date will be highlighted in black. If the date is set with memo function, then this date will be highlighted. To view all memos of one day, press OK to see the schedule.
schedule. Add task: you can select task type reminder, meeting, and course. Jump to Date: You can move to the calendar of the specified date. Go to weekly view: You can go to weekly and monthly view [Tasks] You can have such operations as Create Memo, Browse, Add, Edit, Delete, Delete All and Send on memos. If you have set alarm for the memo, when the set time is reached, the mobile phone will ring and display the memo content.
The system has set 5 alarm clock options and the defaulted is off. You can activate one option or all options according to the actual demand. Every alarm clock option can set independent time and date. When the time is reached, the mobile phone will give out alert tone and flicker the current time and date on the screen. Press Stop to stop alarm clock; press Sleep, then the mobile phone will pause ringing and continue after 4min.
current time of every country corresponding to every time zone. [Calculator] The upper direction key for “+” and the lower direction key for “- ”, the left direction key for "×" and the right direction key for "÷"; Press the clear key to clear the latest inputs or results digit by digit; press the clear key long to clear all content or result; Press “OK” key to obtain the result. Note: The precision of this calculator is limited and can be used for simple calculation.
currency, enter the sum to be converted, press “OK” and then choose to local currency or foreign currency. [Stopwatch] Typical Stopwatch:Respective Split Timing,Lap Timing and View Records. nWay Stopwatch: [E-Book reader] In standby, choose Menu/Organizer/E-book Reader. After e-book is activated, the e-book list will be displayed. If no e-book, click Options to have such submenus as Clean Up Bookshelf and Global Settings.
Activate E-book: Activate the current e-book and enter the reading menu. Update: Update the e-book list. System Preset: You can set Font Style, Font Size, Scroll By, Auto Scroll, Scroll Speed, Full Screen, Encoding and Storage Priority. Details: Display the detailed information about the current e-book. Delete: Delete the current e-book. Delete All: Delete all e-books. Ranking: You can have such options as per Name, As per Type, As per Time, As per Size or None to rank e-books.
options for the preset system. Help: You can have some operation instructions. Press the number key 7 to switch to auto page curl, the number key to switch to full screen, the number key to activate tip function, the number key 2 to add bookmark, the number 3 to enter search page, the number key to enter page skip, the number key 5 to enter bookmark, the number key to search the next, the number key to remove bookmark and the number key to enter the setting function.
including mobile phone, computer, headset, in-car accessories etc. With Bluetooth function, you can send photo, video segment, audio segment, personal business card and memo. You can also establish wireless connection with the compatible PC to transmit files. As the device supporting Bluetooth wireless technology performs communications via wireless wave, you need no keeping the device opposite to other devices but keep the distance between tem not more than 10m (about 33”).
to activate this option. When Bluetooth function or other functions are being used, allowing this function to operate in the back desk will consume more power. It is recommended to close this function when it is idle. Inquiry audio device: With this function, you can inquiry audio device. For other devices, enter My Devices to search. My Devices: After entering this option, you will see the Bluetooth devices compatible with the mobile phone.
phone’s Bluetooth function is not activated, you can have activation confirmation. Visibility: After this option is activated, other peripheral devices supporting Bluetooth wireless technology can see your device and its name via search. After the step audio play service is activated, this device will be unable to be searched. Change Device Name: You can edit my device name.
this path as hand-free devices. FTP Settings: You can set the file directory shared by my device and the access right to online Bluetooth devices. About: Here, you can see the name of my device, my device’s Bluetooth device address and the Bluetooth services supported by my device. Tip: When searching Bluetooth devices, make sure that the peripheral Bluetooth devices are within the signal cover range and can be searched.
compatible device, you should enter the album or file management. 2. Choose the content to be sent, and then choose Options->Send->To Bluetooth. The screen will display the device supporting Bluetooth wireless technology and within the signal coverage. To disconnect search, choose “Cancel”. 3. Choose the device to be connected with. 4. If another device requires matching before data transmission, the device will send hint and require inputting matching password. 5.
other folders or the folders on T-flash card. After setting, the file received via Bluetooth will be automatically saved to the specified folder. Tip: The function of using Bluetooth headset for calls is limited to only host (SIM1) call or slave (SIM2) call. If alternate SIM1 and SIM2 calls are available, this function will not be supported. Before using Bluetooth headset for calls, please go to the menu settings to confirm that the audio path has been set as hand-free device.
online service. Enter my devices; delete the matched devices to disconnect other devices with my device. The connection with the devices out of the signal coverage will be ineffective. 6.9 File Manager You can manage photos, MP3 and folders. [Phone]-- The storage body is phone. [Open]: You can open Audio, Images, Photos, My Music and Video folders. Received Audio—Audio folder Play: You can play the selected content. Forward: You can send audio to Profiles, MMS, e-mail and SMS.
Copy: You can copy the file into Audio, Images, My Music, Photos, Video or specified folders. Move: You can move the file into Images, My Music, Photos, and Video or specified folders. Delete: You can delete the current record. Delete All files: You can delete all records in all current folders. Sort by: You can rank files as per name, type, time and size or choose “None”. Images—Images Folder View: You can see the current image.
Move: You can move the file into Audio, My Music, Images, Photos, Video or specified folders. Delete: You can delete the current record. Delete All files: You can delete all records in all current folders. Sort by: You can rank files as per name, type, time and size or choose “None”. My Music—MP3 Folder Play: You can play the current MP3. Forward: You can send music to Profiles, MMS and SMS. Details: You can see the date and size of the file. Rename: You can rename the folder.
Delete: You can delete the current record. Delete All files: You can delete all records in all current folders. Sort by: You can rank files as per name, type, time and size or choose “None”. Photos—Photo Folder View: You can see the current photo. Edit: You can enter photo artist and edit the desired photo. Forward: You can send photos to screen saver, Switch-on Switch-off Phonebook, MMS, e-mail and SMS etc. Details: You can see the date and size of the file.
Delete: You can delete the current record. Delete All files: You can delete all records in all current folders. Sort by: You can rank files as per name, type, time and size or choose “None”. Video—Video Folder Play: You can play the current video. Forward: You can send videos to MMS, e-mail and Bluetooth. Details: You can see the date and size of the file. Rename: You can rename the folder.
Sort by: You can rank files as per name, type, time and size or choose “None”. Create Folder: Under the root directory, you can create a new folder to save more detailed files. Format: Formatting can clear all files in the mobile phone and newly created folders. After formatting, you need to restart the mobile phone and the Audio folder and Images folder will restore automatically and Photos folder will automatically occur after the first photo is taken.
7. English Editor Operation The mobile phone provides multiple convenient input modes, which can support the use of other functions. Basic letter input After “abc”/“ABC” is chosen, input your desired letters with the standard keypad. Number input This mode is mainly used to input phone numbers etc. After “number” is chosen, you can input digit into the place where the cursor is flickering. Symbol input In any of the above input modes, you are provided with symbol input.
8. Use USB Notices before use Always connect and stop USB device correctly. Never use Windows formatting command to format the mobile disk of the mobile phone; otherwise, it will be damaged severely. USB work environment: Windows2000 / XP. For other operation systems, the connection between PC and the mobile phone cannot be conducted unless USB driver is installed.
9.Appendix Ⅰ Troubleshooting Phenomena Possible Causes 1. Unable to switch on Does the battery have power? 2. Is the battery placed correctly 1. The SIM card is dirty. 2. Reinstall the SIM card. 3. The SIM card is damaged. Clean it. SIM failed Replace it. Check the signal strength icon on the screen. If the icon contains 4 Poor signals bars, it indicates the signal is the strongest; if below 1 bars, it indicates the signal is very poor.
1. Maybe you have set Hide My Caller ID but your network operator does not provide this service for you. 2. Strong interference exists 3. Maybe you have activated Unable to dial out around you. the call restriction function. 4. Maybe you have activated Line 2 but your network operator does not provide this service for you.
1. The battery may discharge too much; so it cannot be Unable to charge charged the battery until it is connected for certain time. 2. Its performance has worsened. 1. Too weak signals or strong 2. SIM interference. card installed Unable to register properly? Bad contact or to the network SIM card damaged? If the SIM card is broken, please contact the network operator to replace it. 1. Check if the too low photo 2.
1. Check if the object taken is 2. Check if the mobile phone moving. Photos taken are too unclear shivers slightly while you press shutter. Photos taken is distorted The object taken may be too close to camera lens. Unable to access service menus. Maybe the SIM card does not support service function. Only part of the The size of the photo may be too photo set as big. The recommended size is standby photo can 240*320. be seen.
10.
11. Appendix Ⅲ Notices for the use of accessories Battery More than 12h charging is needed for the new battery or that idle for long. Other batteries other than the original one can damage your mobile phone and cause risk! The short in any form can lead to explosion, fire or personal injury! For your security and environment protection, do not throw the battery freely but put it into the specified recovery place.
use so as to prevent damaging the phone or even causing explosion, fire or personal injury! Always use the charger by the original manufacturer so as to prevent damaging the phone or even causing fire or personal injury etc! USB Please insert USB in switch-off status or choose the first option “Memory unit” in switch-on status, then the mobile phone can be used as a memory body. Never insert the USB reversely, because doing so can make the I/O port short.
It is recommended to use eligible T-Flash card, because the use of ineligible products may damage the T-Flash memory card slot.