User guide

System Administrator’s Guide – Release 7.5
______________________________________________________________________________________________
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
Revised: April 9, 2013
Page 90
11.8.2 Viewing a Handset Template’s Configuration
To view a template’s phone configuration, click the View link in the Action column in
the list of Handset Configuration Templates.
11.8.3 Creating a New Handset Template
New templates can be created from any phone’s configuration.
To create a new template:
1. Navigate to Phone System > Handsets and click the View Configuration
link on the specific handset.
2. Change the configuration according to the requirements for the new template.
The template includes the PFK setup and the Handset Preference Group
from the phone.
3. Click Save in the Template Options section, and enter a new description in
the pop-up window. Click OK. This saves the template, and it is available in
the list of Handset Configuration Templates for the specific handset.
4. Navigate to Phone System > Handsets to return to the handset
configuration page. 0.
11.8.4 Applying a Handset Template
To configure a template to multiple phones:
1. Navigate to Phone System > Handsets, and go to the SIP Handsets
section.
2. Select + by Bulk Edit to assign multiple handsets to the Handset Preference
Group at once. The Bulk Edit options are available.
3. Check the box in the left column for the phones to be changed.
4. Select the desired Handset Template in the template drop-down list.
5. Click Apply. Reboot the phones for the changes to take effect. The phones
are now configured with the PFK setup and Handset Preference Group
defined in the template. 0.