User guide

System Administrator’s Guide – Release 7.5
______________________________________________________________________________________________
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
Revised: April 9, 2013
Page 121
To create the DID Lines:
Configure each of the incoming lines that will use DID blocks. The following line types
can use DID blocks:
• T1/PRI
• T1/RBS
• SIP Proxy
• SIP Gateway
The Modify window for a T1/PRI Digital Line:
Click on Routed using DID Block(s) and check the block or blocks to use for this
outside line.
Note: For Digital lines, do this for each channel. If all channels will use the same
settings, check the Apply settings for this line to all lines with the same Port
box.