User guide

System Administrator’s Guide – Release 7.5
______________________________________________________________________________________________
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
Revised: April 9, 2013
Page 210
• Digital line fields PPP Username, PPP Password and PPP MTU are not included
in the export.
• If the current system is not “clean” and has conflicts with the imported
configuration settings, then conflicts will be resolved for the import settings in the
following manner:
• Digits will be appended to user login names and incremented, starting at 01, as
needed (e.g. jAdams will become jAdams01).
• Extensions change to the lowest available extension.
• Phones with conflicting MAC addresses will not import and all references will be
removed (e.g. call routing and BLF PFK assignments).
• Analog phones with no available port will not import and removes all references
(e.g. call routing and BLF PFK assignments).
• SIP handsets and SIP gateway station numbers may not preserve on an import.
If changing station numbers for generic SIP phones or SIP gateways, then the
new station number must be set up on each device.
• On Multi-site configurations, the Export will not include references to extensions,
users or outside lines at remote sites.
• Imported extensions/users are limited to the total number available in the
imported system. The order in the export file determines available
extensions/users. If exceeding the imported server’s extensions/user limit, the
system disables the remainders and does not import.
• Do not modify the XML export file.
• Server with version 7.0 will export only user, system extension and Allworx
handset parameters and only a subset of these parameters. Exports from 7.0 can
be imported into servers with 7.1 or greater versions. Exports from 7.1 or greater
cannot import into servers with 7.0.