User guide

System Administrator’s Guide – Release 7.5
_______________________________________________________________________________________________________________
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
Revised: April 9, 2013
Page 24
1. Choose the desired software version.
2. Click Download Update. 0.
Option 2: Upload update from PC
1. Download the update files to a PC from the Allworx portal (
www.allworxportal.com), and
then upload to an Allworx server.
2. Click the Browse button to navigate to the location of the downloaded Allworx server
software file from the Allworx portal.
3. Select the file, and click Open. The Update page displays. 0.
1. Click the Load button. The page displays the current version of software and the software
version of the file that was loaded on the system. A warning message displays for any
inconstancies such as: 0.
a. Update version is the same or lower than the currently running version.
b. Update is intended for a different Allworx server model. .
4.2 Activating Server Software
After loading the software onto the Allworx server, the System Administrator can determine when the
update should begin by selecting one of the following buttons:
• Activate Update Now - update begins immediately
• Active Update Later - update begins at another time
• Cancel Update - ends the update and returns to the main update screen
To begin the activation immediately, select the Activate Update Now button. The Server Software
update begins.
NOTE: After installing, close all browser windows and open a new browser window before proceeding. If
there is a browser session open during the upgrade, the Admin page may not display properly.