User guide

System Administrator’s Guide – Release 7.5
______________________________________________________________________________________________
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
Revised: April 9, 2013
Page 70
Phone
Function
Description
Applies to
Allworx
Desk
Phone
Allworx
Reach
Appl.
Allworx
Generic
SIP
Phone
Replace Enable substituting the phone with another
phone. The Replace feature transfers all of
the original phone’s configuration
parameters and settings to the new phone.
Use this function to replace a defective
handset with a new one. If the replacement
has fewer PFKs than the original handset,
the system copies the PFKs defined on the
original handset, in order from the bottom –
left of the PFKs, up to the number of PFKs
on the replacement handset. The system
replaces original handset PFK definitions
that are unsupported on the replacement
handset with default values.
Yes No No
IP Address This is the IP address assigned to the
handset. Clicking the link will open the
Phone Administration page in a separate
browser window if your PC has a network
communications path to the phone; see
Phone Web Administration on page 92, for
more information.
Yes No No
Setup Display the Allworx Reach Installation
Assistance website.
No Yes No
Modify Enable modification of handset Call
Appearance parameters.
Yes Yes Yes
Delete Delete the Call Appearance from the
phone. If there is only one Call
Appearance or if you click Delete on the
first Call Appearance, the server deletes
the phone From the system.
Yes Yes Yes
Ring Ring the phone. Use this function to test
that the phone is connected and
operational.
Yes Yes Yes
Reboot the phones after changing any settings on the View Configuration page for the
changes to take effect. The Allworx Server Administrator can do this using the Reboot
link described above or manually, from the phone.