User guide

System Administrator’s Guide – Release 7.5
______________________________________________________________________________________________
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
Revised: April 9, 2013
Page 79
Line
Appearance(s)
Use Dial Plan
Enable dialing a phone number when
the phone does not display the selected
Line Appearance PFK, is not recorded
in the phone call history, and is not
available for redial. If the CO lines on
the system do not follow the North
American Numbering Plan (including if
the lines connects to another PBX), the
user may want this feature disabled.
The use of this feature requires the
server’s dial plan to be configured (see
Chapter 14, Dialing Rules and Service
Groups).
Yes No
Off Hook Auto
Answer*
Enable answering any new call when it
goes off hook.
Yes No
Off Hook
Ringing*
Enable the phone to ring if there is an
active, incoming call. However when
this checkbox is disabled, the phone
station will not ring if the user is already
on an active call. The appearance LED
indicators and the display operation are
not affected.
Yes Yes
On Hook
Dialing*
Enables dialing a number on the
keypad without picking up the handset
or hitting the speaker phone button.
When the phone is on hook and a digit
is dialed on the keypad, the phone will
automatically go into speakerphone
mode.
Yes No
Quick Transfer Enable one-touch call transfers using
BLF and Speed Dial PFKs. If disabled,
pressing a BLF key during an existing
call will terminate the original call as
was standard in server software
releases 7.3 and lower.
Yes No
SNMP Enable using the SNMP agent on the
handset by network management tools.
Yes No
Visual on Call* Enables lighting the handset’s Visual
Ring Indicator when the handset is off
hook.
Yes No
Visual Ringing* Enable lighting the Visual Ring Indicator
when the phone has an incoming call. If
disabled, only audible ringing is heard, if
the feature is enabled.
Yes No
* indicates that the setting can be overridden from within the on-handset configuration menus.