User guide
 System Administrator’s Guide – Release 7.5 
______________________________________________________________________________________________ 
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com 
Revised: April 9, 2013 
Page 87 
The Emergency Alert and Hot Desk assignments do not have the define link. 
There are no further options to choose. 
The Schedule assignment has a change link. Use this link to update the 
additional options associated with the Schedule PFK. 
6.   Use the drop-down menus to update the selection, and click Done. 
7.   Repeat for each PFK, as necessary. 
8.   Click Update, the handset configuration screen displays. 
9.   Go to Phone Systems > Handsets to return to the handset page. 
0.  
11.6 Enhanced PFK Administration 
With the Allworx 9224 phone and Allworx Tx 92/24 Expander, it is possible to have up 
to 96 PFKs on a single phone. Enhanced PFK Administration provides a System 
Administrator with tools and flexibility in managing the PFKs of all Allworx phones. 
11.6.1  Moving Up and Moving Down 
On each handset’s View Configuration page, every PFK has a Move Up   and Move 
Down   button. These buttons enable the Administrator to swap a PFK definition with 
the PFK above (Move Up) or below (Move Down) the selected PFK. 
11.6.2  PFK Insert and Delete 
Delete   or Insert   buttons display next to each PFK. Clicking the delete icon 
eliminates the PFK and shifts all PFK definitions below it up by one location. Because 
of the shift, PFK definition #1 in each bank of 12 shifts “up” to the bottom (to position 
number #12) of the bank to its left. The last PFK definition on the station becomes Not 
Used (position #12 of the last bank). Clicking the insert icon next to a PFK shifts all 
PFK definitions below it down by one position. Because of the shift, PFK definition #12 
in each bank of PFKs shifts “down” to the top (to position number #1) of the bank to its 
right. If the last PFK on the station (handset or Expander) was in use, its definition will 
“drop off” the end of the list and will no longer be configured. 










