User Manual

Allworx Phone Model 9204/9204G User Guide
Page 4 +1 866 ALLWORX * [phone]
www.allworx.com
Revised: 5/21/14
3. View the initialization progress on the phone screen. A normal sequence includes:
• Allworx Logo
• Configuring Network
• Starting network
• Loading configuration files
• Station Init complete
After successful startup, the phone displays a combination of the date, time, user
presence, user name, and extension or the phone display may suggest assigning the
handset to a user. If this occurs, follow the on screen directions. If the phone does not
follow this sequence or displays an error, contact the Allworx Server Administrator.
2.2 Adjust the Phone Angle
The phone base angle adjusts for easier phone screen reading.
To adjust the phone base angle:
1. Unplug the phone from the PoE or the power supply. Remove the handset from the hook
and lay the phone face down on a soft surface.
2. Hold the base with the fixed tabs facing the bottom of the phone. Select one of the three
available positions to connect the base to the phone. The set of holes at the bottom of
the phone provides the steepest angle.
3. Place the fixed tabs in the preferred holes on the back of the phone. Rotate the phone
base upwards until the flexible tabs click into place.
To remove the base:
1. Remove the handset from the hook and lay the phone face down on a soft surface.
2. Press down on the flexible tabs and rotate the base towards the phone bottom until the
fixed tabs easily lift out of the holes.
2.3 Volume Adjustment
The volume of the incoming ring, handset, speaker phone, and the headset is adjustable.