User`s manual

14
S2000 SERIES & S2300 SERIES COMBO & C2200
1. Timer mode: The default mode is off. You can set the timer once,
daily, weekly, monthly and yearly.
2. Timer Service: Select between Channel or Record. If Channel is
selected, the Wakeup Channel is displayed in the following item.
If Record is selected, the Wakeup Message is displayed in the
following item. In wakeup message, you can select among
Birthda y, Anniversary, General. At the same time the duration
item turns grey.
3. Wakeup Date, On Time: Use numeric keys to input the valid date.
Duration: Set the gap time. After waking up, system will power
off automatically after the duration time.
4. Press MENU or EXIT key to save and exit.
3.6 Parental Lock
Before entering into the Parental Lock window, you need input the
correct password. The default password is 0000.
1. Menu Lock: Press keys to select between Off and On.
If select “On” , you can not enter into the window before entering
the password.
2. Channel Lock: Press keys to select between Off and
On. The default value is Off.
If select “On”, you can not view the locked channel set in
Chanel List Edit window until you have inputted the correct
password.
3. New Password: User numeric key (0-9) to input the new password.
4. ConrmPassword:Inputthenewpasswordonceagain.
ConrmpasswordmustbethesameastheNewpassword.
System will inform you “Change password successfully!” while
they are the same, or inform you to input the password of
Conrmpasswordonceagainwhentheyarenotthesame.
3.7 OSD Setting
1. OSD Timeout: Press keys to select from 1 to 10 by
step1. The default values is 5.
2. OSD Transparency: Press keys to select among Off,
10%, 20%, 30%, 40%. The default option is Off.
Press MENU or EXIT key to save and exit.
3.8 Favorite
There are 8/32 favorite groups listed in this window (optional). Press
PR+, PR- keys to select one and press OK key to the Rename
window. Since the same operation as the above the Add Satellite
window, here we don’t explain any more.
3.9 Other
1. LNB Power: Select between Off and On.
2. Channel Play Type: Select among All, Free, Scramble.
3. Auto Standby: Select between On and Off.
4. Tools
1. Press OK key or key to pop up the “Input Password” dialogue,
you can not enter into the menu unless the correct password is
inputted. The default password is 0000.
2. Press PR+, PR- keys to move the cursor up or down.
3. Press EXIT key or key to move the focus to the left menu.
4.1 Information
Press OK key to the Information window.
4.2 Factory Setting
Press OK key to enter into the Factory Setting
window.