Instruction manual

Specification

Power Output (1% Distortion, 1kHz, Both Channels Driven, Continuous Average): -

8 Ohms >300 Watts

4 Ohms >540 Watts

8 Ohms Bridged >1100 Watts

4 Ohms Bridged >1350 Watts

Frequency Response (-3dB): - < 1Hz - >100kHz

Distortion (1kHz, 8Ohms, -1dB below full Power): - <0.02%

Input Sensitivity (100Watts, 8 Ohms, 1kHz): -

Internal Jumper Positions: - 1 (High) 0.5 Volts

(Please see drawing) 2 (Medium) 1.0 Volts

3 (Low) 1.4 Volts

Input Impedance: -

Phono 20k Ohms

XLR 10k Ohms per Leg

Damping Factor: -

8 Ohms >100

4 Ohms >50

S+N/N Ratio (IEC “A”): - >100dB

Absolute Phase: -

Phono Zero Degrees

XLR Zero Degrees, Pin 2 Hot

XLR CMRR (100Hz - 10kHz): - >60dB

Dimensions (Including Terminals): - D 330, H 95, W 445

Weight: -

Net 16kg

Packed 18kg

E. & O.E. The policy of Alner Hamblin Electronics Ltd. is that of continuous design

and development. We reserve the right to change specifications without prior notice.