DUNSTESSEN AE 9017 E AE 607 E 10401250370
1 FIG. 2 1 2 2 FIG. 1 FIG. 3A 2 1 FIG. 3C 2 1 3 3 2 FIG. 3B 1 2 FIG. 3D FIG. 3E 1 2 1 ON/OFF 3 ON/OFF FIG.
FIG. 5 169 TUBES FIXING BRACKET BEFESTIGUNGSBÜGEL FÜR DIE SCHÄCHTE FIG. 6 A B C MOTOR BOX FIXING HOLES BEFESTIGUNG DES MOTORKASTEN B A HOOD FIXING HOLES Ø8mm SICHERUNGSLÖCHER FÜR DIE HAUBE Ø8mm MIN. 650 D E F G I N I H N L FIG. 7 O Q FIG.
GB Introduction These instructions are designed to tell you of the various technical details of your cooker hood and to make you familiar with its use. Since these instructions cover more than one type of hood within the same series, it may be that reference is made to components that do not form part of the hood that you are installing. The hood may be used as an exhaust or filter hood.
except for the button area (Fig. 3)and lamp diffusor. It is also important to remove and clean or substitute frequently the filter installed in the hood. This appliance is not intended for use by small children or infirm persons without supervision.Young children should be supervised to ensure that they do not play with the appliance. Maintenance NOTE: Prior to any maintenance, switch off and disconnect from electrical supply.
Fettfilters angezeigt. Wird bei eingeschalteter Haube die Taste + (plus) für mehr als 2 Sekunden gedrückt wird die Intensivstufe für 5 Minuten aktiviert, danach schaltet die Haube in die zuletzt eingestellte Geschwindigkeit zurück. Während dieser Zeit blinkt im Display die maximale Geschwindigkeit. Anzeige und Funktion der Filtersaettigungsanzeige Für Abb. 3B - Der Saettigungsgrad der Haube wird durch blinken des Schalter der eingestellten Geschwindigkeit angezeigt.