User manual

The cooking zones are indicated by markings on the cera-

mic top.

The cooking zones are operated via the corresponding

switch box or built-in oven and this is in the respective

manuals.

The dimensions of the cooking zones are such that they

accommodate standard sized sauce pans.

Switching on the two-circuit zone

If the second circle of the two-circuit zone is needed the

control knob has to be turned over position 3 to the limit

stop from where it automatically springs back to position

3. The temperature can be controlled by turning back the

knob to the wanted position on the opposite direction.

Setting it back to zero turns off the cooking zone.

Switching on the warming zone

The warming zone will be turned on and off by the touch-

control unit located on the ceramic surface in front of the

warming zone. By touching the corresponding field, I resp.

0 will be switched on resp. turned off.

Residual Heat Indicator

This warning lamp lights up when the surface of the

cooking zone reaches a temperature which could cause

burning.

This lamp also remains lit after the heated-up area has been

switched off as long as the residual heat of the surface still

could cause burns. The lamp will only go out when there

is no more danger (temperature below 50°C).

The lamp with four lights indicates the corresponding

cooking zones. This way it is possible to see at once which

zone still hot.

COOKING ZONES