User manual

10
Room <= 10°C 10 to 15°C 15 to 20°C 20 to 25°C 25 to 32°C >= 32°C
temperature
Recommended STOP Small and Small, Medium Hot * STOP
size Medium Medium and Large large
- When the ice tank is full the machine stop and (g) indicator lights on.
* if the ambient temperature is over 25°C, use HT function (12). The ice maker will adapt the round time.
HOW TO STOP THE ICE MAKER?
If you want to stop ice production, Press button M / A (10).
Note: when the production will start again, the appliance will start with an ice off round in order to take
out all the remaining ice in the ice making chamber (6).
Note: when the production will start again, the appliance will start with an ice off round in order to take
out all the remaining ice in the ice making chamber (6).
CLEANING
CLEANING
First, unplug the appliance.
Warning: do not touch the evaporator. Take out all the remaining cubes in the appliance (ice cube tank
(5) and ice making chamber (6) if needed). Take out the ice tank, clean it with soft soap and rince it with
clear drinking water.
Take out the Drainage knob (9), remaining water will flow out.
To completely drain the machine, smoothly tilt it (do not exceed an angle of 45°).
Use a soft damp cloth to wipe the inside and outside of the ice maker.
Never use any abrasive or chemical product.
Rinse several time with clean drinking water to flush out any dirt or soap residue.
Wipe over with a dry cloth. Put back the water tank.
Put back the Drainage knob (9).
notice MG6: notice MG1 27/01/10 14:40 Page 10