User Manual

5 User Manual
Quick Reference Guide - Continued
5. Go to your phone’s bluetooth settings and nd “Alpatronix
HX500” on the list of available devices. Select it to pair (If needed,
please enter 0000 as the pairing passcode).
6. Once successfully paired, you will hear the prompt “second
device connected”, and the LED on both earbuds will blink BLUE
once every 7 seconds. Your left earbud is now connected to your
phone. To connect the RIGHT side independently as well, replace
both earbuds inside the charging case, then take the RIGHT earbud
out and repeat the pairing steps only on the RIGHT earbud.
3