Datasheet
Chapter 3: Installation
3.1. Prerequisites
In this section are described the environmental conditions in which ALPES LASERS
QCLs and electronic equipment should be stored and manipulated and prerequisites
for its operation. The items listed in table 3.1 must be provided by the customer for
ALPES LASERS QCLs and electronic equipment to be operated. It is highly advisable
to have the recommended equipment available.
3UHUHTXLVLWHV
H[WHUQDOSRZHU
VXSSO\IRU/''
VWDELOL]HG'&SRZHUVXSSO\
SRVVLELOLW\RIUDPSLQJWKHYROWDJHXSRUGRZQ
WR9
XSWR$'&PLQLPXP
ULSSOHIUHHOHVVWKDQ
FXUUHQWUDWLQJODVHURSHUDWLRQFXUUHQW[GXW\F\FOH
&:ODVHUGULYHU
GULYHUGHGLFDWHGWR&:ODVHUV
FXUUHQWFRQWUROXSWR$
YROWDJHUDWLQJXSWR9
//+ZDWHUFRROLQJ
RSWLRQDO
/PLQDWWRR&WDSZDWHU
PPIOH[FDEOH
/''ZKHQQRW
SURYLGHGE\$/
SXOVHFXUUHQWRIXSWR$
YROWDJHXSWR9
PD[LPXPULVHIDOOWLPHRIQVWRSUHYHQWGHWULPHQWDO
KHDWLQJ
WRROV
VHWRIDOOHQNH\V
IODWVFUHZGULYHU
UHFRPPHQGHG
HTXLSPHQW
RVFLOORVFRSH
SRZHUPHWHURURWKHUPHDQVRIGHWHFWRU
PXOWLPHWHU
Table 3.1.: Prerequisites for the operation of the ALPES LASERS QCLs and Starter Kit.
3.1.1. Environmental conditions
The following guidelines are standard across all ALPES LASERS products:
• Indoor use only
• Ordinary Protection: This product is NOT protected against the harmful ingress
of moisture.
• Maximum Relative Humidity: <80% RH, non-condensing
• Operating temperature range of 0
◦
C to 40
◦
C
• Storage and transportation temperature of -40
◦
C to 70
◦
C
24 QCL user’s manual v3.0










