Datasheet

7. Maintenance
In this chapter the maintenance procedures for the installation of a QCL in the HHL
housing and Starter Kit components calibration are presented.
IMPORTANT:
The maintenance procedures included in this chapter have to be
followed carefully by expert users only. Delicate operations may
result in permanent damage to the laser if not carried out properly.
Contents
7.1. Laser installation in LLH housing . . . . . . . . . . . . . . . . 76
7.1.1. Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
7.1.2. Contact set . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
7.1.3. Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
7.1.4. UP and DN contact exchange . . . . . . . . . . . . . . . . . 81
7.2. Calibration procedures . . . . . . . . . . . . . . . . . . . . . 82
7.2.1. TCU interlock level setting procedure . . . . . . . . . . . . . 83
7.2.2. TCU calibration . . . . . . . . . . . . . . . . . . . . . . . . . 84
7.2.3. TPG calibration . . . . . . . . . . . . . . . . . . . . . . . . . 93
75