Datasheet

7.1 Laser installation in LLH housing
7.1.4. UP and DN contact exchange
Follow procedure 7.1.3, adding those additional steps to step 7:
1. remove the screw (5) located at the back of the contact set, as shown in figure
7.7
2. remove the copper contact (6)
3. replace it with the copper contact supplied by ALPES LASERS with the new laser
4. tighten back the screw (5)
5
6
Figure 7.7.: Exchanging the laser submount UP and DN contact (right).
c
2012 SA 81