Specifications

encapsulation (Any Transport over MPLS)
MP-60
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
encapsulation (Any Transport over MPLS)
To configure the ATM adaptation layer (AAL) encapsulation for an Any Transport over MPLS (AToM),
use the encapsulation command in the appropriate configuration mode. To remove the ATM
encapsulation, use the no form of this command.
encapsulation la
yer-type
no encapsulation la
yer-type
Syntax Description
Command Default The default encapsulation is AAL5.
Command Modes L2transport VC configuration—for ATM PVCs
VC class configuration—for VC class
Command History
Usage Guidelines In L2transport VC configuration mode, the pvc c
ommand and the encapsulation command work
together. Use the commands for AToM differently than for all other applications. Table 8 shows the
differences in how the commands are used.
layer-type The adaptation layer type, which is one of the following:
• aal5—ATM adaptation layer 5
• aal0—ATM adaptation layer 0
Release Modification
12.0(23)S This command was introduced.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(15)T This command was integrated into Cisco IOS Release 12.2(15)T.
12.0(30)S This command was updated to enable ATM encapsulations as part of a
v
irtual circuit (VC) class.
12.0(31)S This command was integrated into Cisco IOS Release 12.0(31)S.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.4(11)T This command was integrated into Cisco IOS Release 12.4(11)T.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.2(33)SRC This command was integrated into Cisco IOS Release 12.2(33)SRC.