Specifications

exit (LSP Attributes)
MP-71
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
exit (LSP Attributes)
To exit from the label switched path (LSP) attribute list, use the exit command in LSP Attributes
configuration mode.
exit
Syntax Description This command has no arguments or keywords.
Command Default No default behavior or values.
Command Modes LSP Attributes configuration (config-lsp-attr)
Command History
Usage Guidelines Use this command after you have configured LSP-related attributes for a traffic engineering (TE) tunnel
to
exit the LSP attribute list and the LSP Attributes configuration mode.
Examples The following example shows how to set up an LSP attribute list and exit the LSP Attributes
c
onfiguration mode when the list is complete:
Router(config)# mpls traffic-eng lsp attributes 1
Router(config-lsp-attr)# priority 7 7
Router(config-lsp-attr)# affinity 0 0
Router(config-lsp-attr)# exit
Related Commands
Release Modification
12.0(26)S This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.
Command Description
mpls traffic-eng lsp attributes Creates or modifies an LSP attribute list.
show mpls traffic-eng lsp attributes Displays global LSP attribute lists.