Specifications

exit-address-family
MP-72
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
exit-address-family
To exit from address family configuration mode, use the exit-address-family command in address
family configuration mode.
exit-address-family
Syntax Description This command has no arguments or keywords.
Command Default No default behavior or values
Command Modes Address family configuration
Command History
Usage Guidelines This command is used to exit address family configuration mode.
This command can be abbreviated to ex
it.
Examples In the following example, the router is configured to exit address family configuration mode:
Router(config-router-af)# exit-address-family
Release Modification
12.0(5)T This command was introduced.
12.0(22)S Enhanced Interior Gateway Routing Protocol (EIGRP) support was added in
Cisc
o IOS Release 12.0(22)S.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(15)T EIGRP support was added in Cisco IOS Release 12.2(15)T.
12.2(18)S EIGRP support was added.
12.2(17b)SXA This command was integrated into Cisco IOS Release 12.2(17b)SXA.
12.2(27)SBC This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.